Hi Jim Followed your direction Squelch 1 now = .15 Micro volt Squelch 9 now = .25 Micro volts
The set position on my gen is off a tad,
There must be a hidden way to adjust the sq
On Tue, Nov 11, 2014 at 10:22 AM, Stan M qslstan@gmail.com wrote:
Thanks Jim Here is the file.
Stan Ve4acv
On Tue, Nov 11, 2014 at 4:45 AM, Jim Unroe rock.unroe@gmail.com wrote:
On Tue, Nov 11, 2014 at 1:15 AM, Stan M qslstan@gmail.com wrote:
Using chirp, my squelch setting may still read setting 1 but the actual setting moves from .2 micro volts to 1 micro volt making the squelch useless. any one have any ideas why, what I thought was in firmware is changing?
When I reset the radio by the menue it resets back to default up load again, the squelch changes. Seems to only affect the UHF side.
I would suggest that you download the factory .img that matches your firmware version from here: http://kc9hi.dyndns.org/uv5r/programming/CHIRPrecovery/
Load this .img file into CHIRP. Now import your .img file into this one (File -> Import), edit the settings and then upload it into your radio. Do not upload your "original" .img file.
If you would, reply and attach your original .img file so I can study it.
Jim KC9HI _______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users