The two image files are not compatible. CHIRP supports over 80 makes and models of radio.
You must first create an initial template for your specific model. This gives CHIRP a starting image of your radio and firmware. This is done by selecting the Radio tab in the CHIRP toolbar and perform a Download_from_Radio. This loads your radio's initial parameters.
You can now either Cut/Paste or Import the frequencies into your new template for the UV8D.
John
From: chirp_users-bounces@intrepid.danplanet.com [mailto:chirp_users-bounces@intrepid.danplanet.com] On Behalf Of Rolle Stavlind POP3 Sent: Monday, April 20, 2015 1:40 AM To: chirp_users@intrepid.danplanet.com Subject: [chirp_users] Baofeng UV-5R and Wouxun KG-UVD8
Hi!
Got problems when try to program one off my Baofeng UV-5R.
See the screens dumps below.
Using the daily file from 20150416.
Using Baofeng software the radio works.
The other UV-5R works fine both with Chirp and Baofeng software
When programing Wouxun KG-UVD8 it seems like some parameters don´t transfers to the radio.
/Rolle
Rolle Stavlind
Ledinge Kvarnbol 444
741 90 Knivsta
Tel 018-345597
Mobil 070-5219597
Mail rolle@stavlind.se
