Incorrect, it’s a yaesu, not a baofeng clone.
From: chirp_users-bounces@intrepid.danplanet.com chirp_users-bounces@intrepid.danplanet.com On Behalf Of Nigel A. Gunn G8IFF/W8IFF Sent: 20 August 2019 01:20 To: Discussion of CHIRP chirp_users@intrepid.danplanet.com; Ernesto Xload xload.es@gmail.com Subject: Re: [chirp_users] "RF power set" in Yaesu FT-857
No. It corresponds to your radios low/med/high setting usually. On 19 August 2019 at 18:00 Ernesto Xload <xload.es@gmail.commailto:xload.es@gmail.com> wrote: I'm programming a Yaesu FT-857 and I have a doubt: does the "RF power set" value correspond to the output power in watts?
Best regards 73 _______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.commailto:chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Nigel Gunn, W8IFF at nigel@ngunn.netmailto:nigel@ngunn.net To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.commailto:chirp_users-unsubscribe@intrepid.danplanet.com
Nigel A. Gunn, 1865 El Camino Drive, Xenia, OH 45385-1115, USA. tel +1 937 825 5032 Amateur Radio G8IFF W8IFF and GMRS WRBV701, e-mail nigel@ngunn.netmailto:nigel@ngunn.net www http://www.ngunn.net