Hi Paul, I cannot tell you about the light, as I cannot see mine, but my first question is, did you install the driver before plugging in the cable? If you don't, Windows will install what it thinks is the right driver, and it may not be right. If this is the case, delete the device driver for the device, and reinstall the one that came with your device. Then I would unplug the device, reboot, and reinstall the driver, and then plug in the cable. HTH. Glenn ----- Original Message ----- From: Paul Harris via chirp_users To: chirp_users@intrepid.danplanet.com Sent: Saturday, August 27, 2016 12:39 PM Subject: [chirp_users] Radio did not respond error
Baofeng UV-5X3 Cable PCO3
Had to get drivers to get to this stage but radio does not respond. Do the red and green lights on cable usb end have to remain on or just flash on when you plug in. Computers is a HP windows 7. Paul KB2VEC
------------------------------------------------------------------------------
_______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Glenn at glennervin@cableone.net To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com