Hi Paul,
I cannot tell you about the light, as
I cannot see mine, but my first question is, did you install the driver before
plugging in the cable?
If you don't, Windows will install
what it thinks is the right driver, and it may not be right.
If this is the case, delete the
device driver for the device, and reinstall the one that came with your
device.
Then I would unplug the device,
reboot, and reinstall the driver, and then plug in the cable.
HTH.
Glenn
----- Original Message -----
Sent: Saturday, August 27, 2016 12:39
PM
Subject: [chirp_users] Radio did not
respond error
Baofeng UV-5X3
Cable PCO3
Had to get drivers to get
to this stage but radio does not respond. Do the red and green lights on
cable usb end have to remain on or just flash on when you plug in.
Computers is a HP windows 7.
Paul
KB2VEC
_______________________________________________
chirp_users mailing
list
chirp_users@intrepid.danplanet.com
http://intrepid.danplanet.com/mailman/listinfo/chirp_users
This
message was sent to Glenn at glennervin@cableone.net
To unsubscribe, send
an email to
chirp_users-unsubscribe@intrepid.danplanet.com