also it states for the radio to be off, connected then turned back on, i got a couple error messages if I didnt do it that exact way
On Fri, Jul 28, 2017 at 2:41 PM, Bill Walter bllwltr@gmail.com wrote:
Paul, Remove and reinsert the connector on the F8-hp. I recently purchased the unit and I found the connector to be too snug to go all the way in at first. It becomes easier to work with in time. Bill N4DHP
On Jul 28, 2017, at 2:25 PM, Paul Veltman stumpie1@sbcglobal.net
wrote:
Hello all,
I received a list error message that my post to the list was denied so I am posting it again. I apologize if it got posted twice.
I just purchased a BaoFeng BF-F8HP and am trying to program it with Chirp. I followed the instructions and a pop up said "cloning" Then an error message popped up that said "radio did not respond." What am I doing wrong here? I am using the BaoFengTech FTDI cable on a windows 10 platform.
TIA for any advice.
Paul _______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to BillW at n4dhp@arrl.net To unsubscribe, send an email to chirp_users-unsubscribe@
intrepid.danplanet.com
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Shawn at slynch@bridgeportequip.com To unsubscribe, send an email to chirp_users-unsubscribe@ intrepid.danplanet.com