There is no difference between digital and analogue channels EXCEPT the MODE is either FM or DIGITAL so Chirp can write to the "digital" channels. It just can't set MODE to DIGITAL.
On 25/03/2022 23:04 D.J.J. Ring, Jr. n1ea@arrl.net wrote:
That makes it crystal clear.
Glenn, K0LNY and the rest of us now have a clear answer. CHIRP cannot read or write to the digital channels!
Fabulous!
73
David N1EA
On Fri, Mar 25, 2022, 10:47 PM Nigel A. Gunn G8IFF/W8IFF <nigel@ngunn.net mailto:nigel@ngunn.net > wrote:
At least for the Yaesu FT-70, I don't have other Yaesu digital radios, Chirp will program frequencies, repeater shift etc. needed for the analogue FM mode but will not let you select digital as a mode or allow the setting of callsigns, etc required tor Fusion/Wires-X use.
On 25/03/2022 22:33 D.J.J. Ring, Jr. <n1ea@arrl.net mailto:n1ea@arrl.net > wrote:
Nigel,
I'm confused - which is probably the way I came out at birth, but isn't the Yaesu Fusion a digital mode?
Can CHIRP work with at least the non-digital channels of transceivers like YAESU FT1DR? That's a Fusion radio but I don't see it listed on https://chirp.danplanet.com/projects/chirp/wiki/Supported_Radios
Other Yaesu Fusion radios are:
FT1DR FT2DR FT3DR FT5DR FT-70DR FTM-100DR FTM-300DR FTM-400DR FTM-3200DR FTM-3207DR FTM-7250DR FT-991
I see in supported radios, that these are listed:
FTM-3100 (use FTM-3200D selection) FTM-3200D
I don't know if FTM-3200D is different than FTM-3200DR
Could you help unconfuse me, I don't know much about Yaesu digital radios.
Thank you,
73
David N1EA
On Fri, Mar 25, 2022 at 6:12 PM Nigel A. Gunn G8IFF/W8IFF <nigel@ngunn.net mailto:nigel@ngunn.net > wrote:
No. Chirp works fine with Yaesu radios. Never heard of a genuine case of Chirp bricking a radio.
On 25/03/2022 17:46 K0LNY_Glenn glenn@ervin.email wrote:
Is this correct?
----- Original Message -----
Nigel A. Gunn, ///shoulders.outwards.resolutions tel +1-937-971-0366 Amateur Radio G8IFF W8IFF and GMRS WRBV701, e-mail nigel@ngunn.net www http://www.ngunn.net