On 25/03/2022 23:04 D.J.J. Ring, Jr. <n1ea@arrl.net> wrote:

That makes it crystal clear.

Glenn, K0LNY and the rest of us now have a clear answer. CHIRP cannot read or write to the digital channels!

Fabulous!

73

David

N1EA 

On Fri, Mar 25, 2022, 10:47 PM Nigel A. Gunn G8IFF/W8IFF <nigel@ngunn.net> wrote:

At least for the Yaesu FT-70, I don't have other Yaesu digital radios, Chirp will program frequencies, repeater shift etc. needed for the analogue FM mode but will not let you select digital as a mode or allow the setting of callsigns, etc required tor Fusion/Wires-X use.

> On 25/03/2022 22:33 D.J.J. Ring, Jr. <n1ea@arrl.net> wrote:
>
> 
> Nigel,
>
> I'm confused - which is probably the way I came out at birth, but
> isn't the Yaesu Fusion a digital mode?
>
> Can CHIRP work with at least the non-digital channels of transceivers
> like YAESU FT1DR?  That's a Fusion radio but I don't see it listed on
> https://chirp.danplanet.com/projects/chirp/wiki/Supported_Radios
>
> Other Yaesu Fusion radios are:
>
> FT1DR
> FT2DR
> FT3DR
> FT5DR
> FT-70DR
> FTM-100DR
> FTM-300DR
> FTM-400DR
> FTM-3200DR
> FTM-3207DR
> FTM-7250DR
> FT-991
>
> I see in supported radios, that these are listed:
>
> FTM-3100 (use FTM-3200D selection)
> FTM-3200D
>
> I don't know if FTM-3200D is different than FTM-3200DR
>
> Could you help unconfuse me, I don't know much about Yaesu digital radios.
>
> Thank you,
>
> 73
>
> David N1EA
>
>
>
>
> On Fri, Mar 25, 2022 at 6:12 PM Nigel A. Gunn G8IFF/W8IFF
> <nigel@ngunn.net> wrote:
> >
> > No. Chirp works fine with Yaesu radios. Never heard of a genuine case of Chirp bricking a radio.
> >
> > On 25/03/2022 17:46 K0LNY_Glenn <glenn@ervin.email> wrote:
> >
> >
> > Is this correct?
> >
> > ----- Original Message -----