Well dumb me. The cable was not all the way into the radio like everyone said. I had to get mad enough to push with both thumbs! It now works having done so.
Thanks to everyone!
Mark Ross
On Feb 1, 2020, at 13:14, John Dodd jump12k@gmail.com wrote:
Yeah, had the same issue... try all com ports until one works. Make sure you push the plug into your HT real hard... it sometimes takes some force.
On Sat, Feb 1, 2020 at 3:02 PM John La JohnLa@usa.net wrote: Here is a list of error messages and solutions that may assist.
www.Miklor.com/COM/UV_ErrorMess.php
John K3NXU
-----Original Message----- From: chirp_users-bounces@intrepid.danplanet.com [mailto:chirp_users-bounces@intrepid.danplanet.com] On Behalf Of Mark Ross Sent: Saturday, February 1, 2020 11:02 AM To: chirp_users@intrepid.danplanet.com Subject: [chirp_users] Error-radio did not respond
I am a first time user. UV 5r. Can’t upload from radio. Error message comes up radio did not respond. I put in Com3 as it shows, model is correct as well as vendor. Any ideas are appreciated
Thank you so much!
Mark Ross
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to John LaMartina at johnla@usa.net To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to JOHN at jump12k@gmail.com To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com
-- John Dodd Chesapeake Bay _______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to mark at marksross77@gmail.com To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com