Yeah, had the same issue... try all com ports until one works. Make sure you push the plug into your HT real hard... it sometimes takes some force.--On Sat, Feb 1, 2020 at 3:02 PM John La <JohnLa@usa.net> wrote:Here is a list of error messages and solutions that may assist.
www.Miklor.com/COM/UV_ErrorMess.php
John K3NXU
-----Original Message-----
From: chirp_users-bounces@intrepid.danplanet.com [mailto:chirp_users-bounces@intrepid.danplanet.com] On Behalf Of Mark Ross
Sent: Saturday, February 1, 2020 11:02 AM
To: chirp_users@intrepid.danplanet.com
Subject: [chirp_users] Error-radio did not respond
I am a first time user. UV 5r. Can’t upload from radio. Error message comes up radio did not respond. I put in Com3 as it shows, model is correct as well as vendor. Any ideas are appreciated
Thank you so much!
Mark Ross
_______________________________________________
chirp_users mailing list
chirp_users@intrepid.danplanet.com
http://intrepid.danplanet.com/mailman/listinfo/chirp_users
This message was sent to John LaMartina at johnla@usa.net
To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com
_______________________________________________
chirp_users mailing list
chirp_users@intrepid.danplanet.com
http://intrepid.danplanet.com/mailman/listinfo/chirp_users
This message was sent to JOHN at jump12k@gmail.com
To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.comJohn Dodd
Chesapeake Bay
_______________________________________________
chirp_users mailing list
chirp_users@intrepid.danplanet.com
http://intrepid.danplanet.com/mailman/listinfo/chirp_users
This message was sent to mark at marksross77@gmail.com
To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com