UPDATE:
The cable appears to be fine. I installed Kenwood's MCP-1A software and it downloaded the radio fine, and all 43 channels appear in the software.
When I turned off the radio, unplugged the cable from the fromputer, then replugged the cable into the computer and turned on the radio, the First time I tried to download the radio I get just a blank screen.
After waiting 30 seconds with nothing happening, and without unplugging or turning off the radio, I tried again to download the radio, then I get the message
_*could not open port COM4: [Error 5] Access is denied.*_
_*====================================================== *_
On 2/24/2019 8:00 PM, Steve Thomas wrote:
I am trying to program my Kenwood TM281 for the first time. I'm using Windows 10. I previously ran Chirp to program a Wouxon hand held and it worked fine with that cable.
I have a Prolific cable I got from BlueMax49ers. The instructions said it was a genuine Prolific chip and to use the latest drivers. So I checked and it is using the latest drivers (3.8.28.0). When I started Chirp, I plugged in the radio, and selected "Download from Radio". It gave me a dialog with Com3 preselected, and I selected Kenwood and TM281. When I clicked OK in the dialog, I get this message:
_*An ERROR Has Occurred*__* *__*could not open port COM4: [Error 5] Access is denied.*_
I tried Com3, and got the same error.
_*An ERROR Has Occurred*__* *__*could not open port COM3: [Error2] The System Cannot find The File specified.*_
(this may be the original error, I don't know. I changed the com port to Com4 before writing down what the original error was when it originally went to Com3)
I looked into Device Manager, and under Ports (Com and LPT) It says the Prolific USB to Serial Comm Port (Com4)
I looked at the Properties and it says this:
Does this sound familiar?
Steve
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Steve Thomas at stevet@alertcpr.com To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com
