This seems to have worked. Thank you for your help with this.
https://www.avast.com/sig-email?utm_medium=email&utm_source=link&utm_campaign=sig-email&utm_content=webmail Virus-free.www.avast.com https://www.avast.com/sig-email?utm_medium=email&utm_source=link&utm_campaign=sig-email&utm_content=webmail <#DAB4FAD8-2DD7-40BB-A1B8-4E2AA1F9FDF2>
On Sun, May 21, 2023 at 8:21 PM Jim Unroe rock.unroe@gmail.com wrote:
On Sun, May 21, 2023 at 9:07 PM David Osborne dosborne1969@gmail.com wrote:
I have tried several different ways to enter the values with no luck.
Here are the values.
QT/DQT Dec is 203.5 QT/DQT Enc is 203.5
You don't have to program a receive tone so this will set it up with a TX tone only. Receive is using carrier squelch only.
Tone Mode: Tone Tone: 203.5 <-- used to set TX CTCSS tone in radio Tone Squelch: {blank}
But if you want to set up both RX and TX tones this is how it should be set up.
Tone Mode: TSQL Tone: {blank} Tone Squelch: 203.5 <-- used to set both RX and TX CTCSS tones in radio
Jim KC9HI _______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to David at dosborne1969@gmail.com To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com To report this email as off-topic, please email chirp_users-owner@intrepid.danplanet.com Searchable archive: https://www.mail-archive.com/chirp_users@intrepid.danplanet.com