On Sun, May 21, 2023 at 9:07 PM David Osborne <dosborne1969@gmail.com> wrote:
>
> I have tried several different ways to enter the values with no luck. Here are the values.
> QT/DQT Dec is 203.5
> QT/DQT Enc is 203.5

You don't have to program a receive tone so this will set it up with a
TX tone only. Receive is using carrier squelch only.

Tone Mode: Tone
Tone: 203.5  <-- used to set TX CTCSS tone in radio
Tone Squelch: {blank}

But if you want to set up both RX and TX tones this is how it should be set up.

Tone Mode: TSQL
Tone: {blank}
Tone Squelch: 203.5  <-- used to set both RX and TX CTCSS tones in radio

Jim KC9HI
_______________________________________________
chirp_users mailing list
chirp_users@intrepid.danplanet.com
http://intrepid.danplanet.com/mailman/listinfo/chirp_users
This message was sent to David at dosborne1969@gmail.com
To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com
To report this email as off-topic, please email chirp_users-owner@intrepid.danplanet.com
Searchable archive: https://www.mail-archive.com/chirp_users@intrepid.danplanet.com