Yes.. after your computer issue, it is possible it upgraded the driver to the newest, rather than the working driver.
On 12/28/2016 23:56, Jardy via chirp_users wrote:
2 things. 1) roll your cable driver back to 3.2.0.0. 2). Push the cable FIRMLY into the radio.
Jardy Dawson WA7JRD Message sent through sub space hailing frequencies using the Universal Translator.
On Dec 28, 2016, at 10:52, Dave <DWB2808@centurytel.net mailto:DWB2808@centurytel.net> wrote:
I use the latest version of Chirp downloaded about 10 days ago. It worked well and did all the programming I need for the Beofeng uv5r, (different cable) Btech UV 2501-220. I had a small computer problem and after correcting the computer problem I could program the Btech UV 2501 but the programming cables for the UV5R have a problem. The one that I used over and over now puts my UV5R in a transmit as soon as i plug it into the computer. The other cable gives me an error message that says the Commport (1-8 ) wont work. What do I do. Thanks for any ideas Dave KD0TUN
chirp_users mailing list chirp_users@intrepid.danplanet.com mailto:chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Jardy at jardy72@yahoo.com mailto:jardy72@yahoo.com To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com mailto:chirp_users-unsubscribe@intrepid.danplanet.com
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to KD8DVR at jl_wilkerson@att.net To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com