Yes.. after your computer issue, it is possible it upgraded the
driver to the newest, rather than the working driver.
2 things. 1) roll your cable driver back to 3.2.0.0. 2). Push the cable FIRMLY into the radio.
Jardy Dawson WA7JRDMessage sent through sub space hailing frequencies using the Universal Translator.
I use the latest version of Chirp downloaded about 10 days ago. It worked
well and did all the programming I need for the Beofeng uv5r, (different
cable) Btech UV 2501-220. I had a small computer problem and after
correcting the computer problem I could program the Btech UV 2501 but the
programming cables for the UV5R have a problem. The one that I used over and
over now puts my UV5R in a transmit as soon as i plug it into the computer.
The other cable gives me an error message that says the Commport (1-8 ) wont
work.
What do I do.
Thanks for any ideas
Dave
KD0TUN
_______________________________________________
chirp_users mailing list
chirp_users@intrepid.danplanet.com
http://intrepid.danplanet.com/mailman/listinfo/chirp_users
This message was sent to Jardy at jardy72@yahoo.com
To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com
_______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to KD8DVR at jl_wilkerson@att.net To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com