Jeff,
When I get this message it is one of two problems:
The first is I go between steps (Menus) to fast. I slow down and give about 5 to 10 seconds between steps. and the radio programing works.
or
I do not have the cable pushed in far enough. What I do then is push the cable into the radio quite hard and while still holding the cable and radio run the progaming (Make sure not transmit at the same time).
I do not know if that is the problem you are having, the these ”fixes” work for me.
N7IY, Peter
----- Peter J. McClosky, N7IY Eugene, Oregon pmcclosky@earthlink.net n7iy@arrl.net http://home.earthlink.net/~pmcclosky/
On May 29, 2017, at 7:22 PM, Jeff Davis kf5hqe.jeff@gmail.com wrote:
Hi Folks,
I’m running a MacBook Pro using OS 10.12.5. I’ve received three different radios along with USB to BaoFang connection cables.
When I open Chrip, the Mac OS systems report shows the USB port and the device so the Mac Sees it.
But when I run the Radio/Download from Radio command, I get the <Screen Shot 2017-05-29 at 9.18.23 PM.png>
Any ideas? I’ve tried all three cables and tried it with this radio as well as two UV-5R’s, same results.
Thank you in advance.
Jeff Davis KF5HQE
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Peter at pmcclosky@earthlink.net To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com