When I get this message it is one of two problems:

The first is I go between steps (Menus) to fast. I slow down and give about 5 to 10 seconds between steps. and the radio programing works.

I do not have the cable pushed in far enough. What I do then is push the cable into the radio quite hard and while still holding the cable and radio run the progaming (Make sure not transmit at the same time).

I do not know if that is the problem you are having, the these ”fixes” work for me.

N7IY, Peter

-----

Peter J. McClosky, N7IY
Eugene, Oregon
pmcclosky@earthlink.net
n7iy@arrl.net
http://home.earthlink.net/~pmcclosky/

On May 29, 2017, at 7:22 PM, Jeff Davis <kf5hqe.jeff@gmail.com> wrote:

Hi Folks,

I’m running a MacBook Pro using OS 10.12.5. I’ve received three different radios along with USB to BaoFang connection cables.

When I open Chrip, the Mac OS systems report shows the USB port and the device so the Mac Sees it.

But when I run the Radio/Download from Radio command, I get the <Screen Shot 2017-05-29 at 9.18.23 PM.png>

Any ideas? I’ve tried all three cables and tried it with this radio as well as two UV-5R’s, same results.

Thank you in advance.

Jeff Davis
KF5HQE

_______________________________________________
chirp_users mailing list
chirp_users@intrepid.danplanet.com
http://intrepid.danplanet.com/mailman/listinfo/chirp_users
This message was sent to Peter at pmcclosky@earthlink.net
To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com