My UV50X2 has the data cable input on the front, it is actually stamped "Data". Also note it likely will show up on a different source than your handheld, even in the same USB port.
On Jan 11, 2018 16:20, "Jim Unroe" rock.unroe@gmail.com wrote:
On Thu, Jan 11, 2018 at 6:48 PM, Charley Bratton charley@bratton.net wrote:
Front jack is the programming connection. Rear jack is audio. Make sure the Tip-Ring-Ring-Sleeve plug is FIRMLY seated.
/CB
On Jan 11, 2018, at 6:34 PM, sreeb sreeb@beers.nu wrote:
I can't help yet, but maybe you can help me. I'm still trying to get
mine
to communicate with chirp at all.
Are you plugged into the front or rear jack?
There is not data jack on the front of a UV-50X2. Both the speaker and data jacks are side-by-side on the rear of the radio. Be sure you have your programming cable plugged into the correct jack.
Jim KC9HI _______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to DarbyInGreen at collier.darby@gmail.com To unsubscribe, send an email to chirp_users-unsubscribe@ intrepid.danplanet.com