My UV50X2 has the data cable input on the front, it is actually stamped "Data". Also note it likely will show up on a different source than your handheld, even in the same USB port. 

On Jan 11, 2018 16:20, "Jim Unroe" <rock.unroe@gmail.com> wrote:
On Thu, Jan 11, 2018 at 6:48 PM, Charley Bratton <charley@bratton.net> wrote:
> Front jack is the programming connection.   Rear jack is audio.
> Make sure the Tip-Ring-Ring-Sleeve plug is FIRMLY seated.
>
> /CB
>
> On Jan 11, 2018, at 6:34 PM, sreeb <sreeb@beers.nu> wrote:
>
> I can't help yet, but maybe you can help me.  I'm still trying to get mine
> to communicate with chirp at all.
>
> Are you plugged into the front or rear jack?

There is not data jack on the front of a UV-50X2. Both the speaker and
data jacks are side-by-side on the rear of the radio. Be sure you have
your programming cable plugged into the correct jack.

Jim KC9HI
_______________________________________________
chirp_users mailing list
chirp_users@intrepid.danplanet.com
http://intrepid.danplanet.com/mailman/listinfo/chirp_users
This message was sent to DarbyInGreen at collier.darby@gmail.com
To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com