Do you have CTCSS tones set on the receive side. If so, remove them. It’s possible the repeaters aren’t sending a tone back to you..
Stay Safe and Stay Healthy John Miklor
On Jun 6, 2022, at 10:01 AM, Al Jones al@aljones.us wrote:
Attached is the image of my 'working' radio - problem is, it's not working right. This an older Baofeng UV-82L much prior to the recent FCC rule changes. I am both a licensed ham (KG5HEJ) and GMRS (WQYM836) operator. Though I recognize the legalities of using this radio, it's use in the GMRS bands is primarily for monitoring local tourists and providing them with help.
That all out of the way. RX/TX on any of the ham bands is without problem, I can talk with anyone on our local repeater system, or simplex, without a problem (barring mountains which are occasional problems) on the GMRS freqs, I'm seeing (on my BCT15X scanner) a carrier being transmitted in the appropriate freq but hearing no voice on the carrier on both the one GMRS repeater channel and simplex. I and a friend have been all over these settings and I hope we're just missing the obvious (obvious to someone else.)
Anyone ???
//al KG5HEJ
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to John LaMartina at johnla@usa.net To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com To report this email as off-topic, please email chirp_users-owner@intrepid.danplanet.com