Remember Com ports are subject to change On Jun 12, 2015 5:50 PM, "John Barker" john@jabarker.net wrote:
When I try to print from my FT-60 Commander it says “memory range 1 to 35” and I say OK but only get one page to print. Any ideas thanks
John
*From:* chirp_users-bounces@intrepid.danplanet.com [mailto: chirp_users-bounces@intrepid.danplanet.com] *On Behalf Of *John LaMartina *Sent:* Friday, April 17, 2015 8:27 AM *To:* 'Discussion of CHIRP' *Subject:* Re: [chirp_users] Yaesu FT-60
An Error Message about Communication is a little vague. Please let us know Exactly what error message are you getting?
Check the Error Message against those found at: http://www.miklor.com/COM/UV_ErrorMess.php
John
*From:* chirp_users-bounces@intrepid.danplanet.com [ mailto:chirp_users-bounces@intrepid.danplanet.com chirp_users-bounces@intrepid.danplanet.com] *On Behalf Of *Jerry A *Sent:* Friday, April 17, 2015 6:36 AM *To:* chirp_users@intrepid.danplanet.com *Subject:* [chirp_users] Yaesu FT-60
*Hello,*
*Would anyone be able to offer help with the Yaesu FT-60 and Chirp? For some reason I am getting an error message about communication between the radio and software. I have used FT-60 Commander, a Prolific USB to com port interface and Windows XP successfully but am unable to make things work with Chirp and Windows 7 using the same procedure, interface and com port.73,*
*Jerry – VE9CD*
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com