Remember Com ports are subject to change
When I try to print from my FT-60 Commander it says “memory range 1 to 35” and I say OK but only get one page to print. Any ideas thanks
John
From: chirp_users-bounces@intrepid.danplanet.com [mailto:chirp_users-bounces@intrepid.danplanet.com] On Behalf Of John LaMartina
Sent: Friday, April 17, 2015 8:27 AM
To: 'Discussion of CHIRP'
Subject: Re: [chirp_users] Yaesu FT-60
An Error Message about Communication is a little vague.
Please let us know Exactly what error message are you getting?
Check the Error Message against those found at: http://www.miklor.com/COM/UV_ErrorMess.phpJohn
From: chirp_users-bounces@intrepid.danplanet.com [mailto:chirp_users-bounces@intrepid.danplanet.com] On Behalf Of Jerry A
Sent: Friday, April 17, 2015 6:36 AM
To: chirp_users@intrepid.danplanet.com
Subject: [chirp_users] Yaesu FT-60
Hello,
Would anyone be able to offer help with the Yaesu FT-60 and Chirp? For some reason I am getting an error message about communication between the radio and software. I have used FT-60 Commander, a Prolific USB to com port interface and Windows XP successfully but am unable to make things work with Chirp and Windows 7 using the same procedure, interface and com port.
73,Jerry – VE9CD
_______________________________________________
chirp_users mailing list
chirp_users@intrepid.danplanet.com
http://intrepid.danplanet.com/mailman/listinfo/chirp_users
To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com