Sometimes cutting off some plastic helps a better contact
בתאריך יום א׳, 26 באוג' 2018, 15:05, מאת Jim Unroe rock.unroe@gmail.com:
On Sun, Aug 26, 2018 at 2:49 AM, E M Recio via chirp_users chirp_users@intrepid.danplanet.com wrote:
Yeah, so what is the deal then? Same cable, same machine, same chirp? Am
I
selecting the wrong menu item for radio?
Hi E M,
Unfortunately you haven't mentioned what the error message is so the best thing I can do is guess. A common problem of these radios is poor positioning of the socket in the case. Most likely, this is causing the 2-pin plug of known working programming cable to not fully engage in the socket of the radio. A common workaround is to put some pressure on the 2-pin plug in an effort to get it to become fully engaged during the cloning process.
Jim KC9HI _______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to amnon at amnon.zohar@gmail.com To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com