On Sun, Aug 26, 2018 at 2:49 AM, E M Recio via chirp_users
<chirp_users@intrepid.danplanet.com> wrote:
> Yeah, so what is the deal then? Same cable, same machine, same chirp? Am I
> selecting the wrong menu item for radio?
>

Hi E M,

Unfortunately you haven't mentioned what the error message is so the
best thing I can do is guess. A common problem of these radios is poor
positioning of the socket in the case. Most likely, this is causing
the 2-pin plug of known working programming cable to not fully engage
in the socket of the radio. A common workaround is to put some
pressure on the 2-pin plug in an effort to get it to become fully
engaged during the cloning process.

Jim KC9HI
_______________________________________________
chirp_users mailing list
chirp_users@intrepid.danplanet.com
http://intrepid.danplanet.com/mailman/listinfo/chirp_users
This message was sent to amnon at amnon.zohar@gmail.com
To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com