[chirp_users] difference between FT-1802 and FT-1802M????
can not get chirp to read my FT-1802 is there a difference between it and a 1802M?
NM4V
Looks like it - Chirp only supports the 1802M....
Yaesu FT-1D FT-50R FT-60R FT-90R FT-817/ND FT-857/D FT-897 FT-1802M FT-2800M FT-1900R/2900M FT-7800R/7900R FT-8800R FT-8900R FTM-350R VX-170 VX-2R VX-3R VX-5R VX-6R VX-7R VX-8R
-----Original Message----- From: chirp_users-bounces@intrepid.danplanet.com [mailto:chirp_users-bounces@intrepid.danplanet.com] On Behalf Of clowery@va.net Sent: Thursday, February 02, 2017 6:00 PM To: Discussion of CHIRP chirp_users@intrepid.danplanet.com Subject: [chirp_users] difference between FT-1802 and FT-1802M????
can not get chirp to read my FT-1802 is there a difference between it and a 1802M?
NM4V _______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Nigel D Forge at nigel@forges.ca To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com
--- This email has been checked for viruses by Avast antivirus software. https://www.avast.com/antivirus
If you have an FT-1802, give it a try with Chirp's FT-1802M driver. I wrote it and I only had an FT-1802M to test it with. I can't tell you if the FT-1802 is any different because I've never touched one. They could be exactly the same.
What I would do to test it is manually enter a few memory channels in the FT-1802. Then download into Chirp and make sure those channels are where they're supposed to be (channel 1 is channel 1, etc.) and that all the frequencies and tones are correct. If it all looks good then there's probably no change to the memory layout between FT-1802 and FT-1802M.
Tom KD7LXL
On Thu, Feb 2, 2017 at 6:00 PM, clowery@va.net clowery@va.net wrote:
can not get chirp to read my FT-1802 is there a difference between it and a 1802M?
NM4V _______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Tom KD7LXL at esarfl@gmail.com To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com
Re: 1802M: I do not need CHIRP to program it. KI6IJI
On Thursday, February 2, 2017 6:02 PM, "clowery@va.net" clowery@va.net wrote:
can not get chirp to read my FT-1802 is there a difference between it and a 1802M?
NM4V _______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Gary at ki6iji@yahoo.com To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com
participants (4)
-
clowery＠va.net -
Gary Lovegren -
nigel＠forges.ca -
Tom Hayward