Yes, it isn't a port issue.

Mike

On Fri, Dec 27, 2013 at 10:11 PM, Amnon Zohar amnon.zohar@gmail.com wrote:

could you comunicate with any other radio? בתאריך 28 בדצמ 2013 05:07, "Michael Walker" va3mw@portcredit.net כתב:

...

Hi All

I know that this is a little off topic and this radio isn't supported by Chirp, but has anyone actually been able to program one?

This is a 16 Channel VHF only unit.

I've tried just about all the software from Baofeng that I can find, but I have not found anything that will talk to the radio.

I am 'assuming' it is using a Kenwood cable configuration as well.

Mike va3mw

---

chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users

---

chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users

On Sat, Dec 28, 2013 at 2:15 PM, w4grj w4grj@satterfield.org wrote:

I have a UV-6, also cannot get it to program with the Baofeng software.

Has anyone successfully programmed the UV-6?

Thanks,

Jack

Jack,

Have you tried the UV-6 software from the Baofeng website?

http://www.baofengradio.com/UploadFiles/20130521142814635.rar

Jim KC9HI

Is the programming of the UV-6 software or a driver/cable issue.

What error messages are you getting?

John K3NXU . . . http://www.miklor.com

From: chirp_users-bounces@intrepid.danplanet.com [mailto:chirp_users-bounces@intrepid.danplanet.com] On Behalf Of w4grj Sent: Saturday, December 28, 2013 2:15 PM To: 'Discussion of CHIRP' Subject: Re: [chirp_users] Baofeng V6

I have a UV-6, also cannot get it to program with the Baofeng software.

Has anyone successfully programmed the UV-6?

Thanks,

Jack

From: chirp_users-bounces@intrepid.danplanet.com [mailto:chirp_users-bounces@intrepid.danplanet.com] On Behalf Of Michael Walker Sent: Friday, December 27, 2013 10:14 PM To: Discussion of CHIRP Subject: Re: [chirp_users] Baofeng V6

Yes, it isn't a port issue.

Mike

On Fri, Dec 27, 2013 at 10:11 PM, Amnon Zohar amnon.zohar@gmail.com wrote:

could you comunicate with any other radio?

בתאריך 28 בדצמ 2013 05:07, "Michael Walker" va3mw@portcredit.net כתב:

Hi All

I know that this is a little off topic and this radio isn't supported by Chirp, but has anyone actually been able to program one?

This is a 16 Channel VHF only unit.

I've tried just about all the software from Baofeng that I can find, but I have not found anything that will talk to the radio.

I am 'assuming' it is using a Kenwood cable configuration as well.

Mike va3mw

_______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users

_______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users