[chirp_users] Chirp; Baofeng BF-F8HP not programming correctly
I have a new Baofeng BF-F8HP which isn't programming correctly. In the new radio the channel NAMES aren't being programmed, everything else seems to work... This is an improvement over the last version, which said INCORRECT VERSION.. when I tried to read the information from the radio.... Downloaded the new version today ...
Help... 73's
Dave Felt KB6ORR
Are the settings set to show NAME instead of FREQUENCY?
On Sat, May 12, 2018, 16:49 Dave Felt feltdd@verizon.net wrote:
I have a new Baofeng BF-F8HP which isn't programming correctly. In the new radio the channel NAMES aren't being programmed, everything else seems to work... This is an improvement over the last version, which said INCORRECT VERSION.. when I tried to read the information from the radio.... Downloaded the new version today ...
Help... 73's
Dave Felt KB6ORR
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to DarbyInGreen at collier.darby@gmail.com To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com
I have the same problem with my baofeng..did you get any feedback?
Sent from Yahoo Mail on Android
On Sat, May 12, 2018 at 4:49 PM, Dave Feltfeltdd@verizon.net wrote: I have a new Baofeng BF-F8HP which isn't programming correctly. In the new radio the channel NAMES aren't being programmed, everything else seems to work... This is an improvement over the last version, which said INCORRECT VERSION.. when I tried to read the information from the radio.... Downloaded the new version today ...
Help... 73's
Dave Felt KB6ORR
_______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to dwight at dherkness@yahoo.com To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com
On Sun, May 13, 2018 at 11:00 AM, dwight herkness via chirp_users chirp_users@intrepid.danplanet.com wrote:
I have the same problem with my baofeng..did you get any feedback?
Adding channel names does not cause them to appear. You must also edit the Memory Display Format of the corresponding display line to enable the display of channel names.
Using the CHIRP UI, the settings would be:
For the top display line: Settings -> Basic Settings -> Display Mode (A):
For the bottom display line: Settings -> Basic Settings -> Display Mode (B):
The choices are Channel, Name and Frequency
Using the redio's menu system, the settings would be:
For the top display line: Menu 21 (MDF-A)
For the top display line: Menu 22 (MDF-B)
The choices are CH, NAME and FREQ
After making any changes from the radio's menu system, remember to download the changes to CHIRP. Otherwise you next upload may return the settings to the way they were previously.
Detailed menu definitions: http://www.miklor.com/COM/UV_MenuDef.php
Jim KC9HI
That works thanks!
Sent from Yahoo Mail on Android
On Sun, May 13, 2018 at 8:15 AM, Jim Unroerock.unroe@gmail.com wrote: On Sun, May 13, 2018 at 11:00 AM, dwight herkness via chirp_users chirp_users@intrepid.danplanet.com wrote:
I have the same problem with my baofeng..did you get any feedback?
Adding channel names does not cause them to appear. You must also edit the Memory Display Format of the corresponding display line to enable the display of channel names.
Using the CHIRP UI, the settings would be:
For the top display line: Settings -> Basic Settings -> Display Mode (A):
For the bottom display line: Settings -> Basic Settings -> Display Mode (B):
The choices are Channel, Name and Frequency
Using the redio's menu system, the settings would be:
For the top display line: Menu 21 (MDF-A)
For the top display line: Menu 22 (MDF-B)
The choices are CH, NAME and FREQ
After making any changes from the radio's menu system, remember to download the changes to CHIRP. Otherwise you next upload may return the settings to the way they were previously.
Detailed menu definitions: http://www.miklor.com/COM/UV_MenuDef.php
Jim KC9HI
Dennis M. Wage
245 Corum Hill Road Castalian Springs, TN 37031 (615) 310-4242 Cell (615) 562-5128 Home http://hammondb3organ.net http://overdubs.net
On Sun, May 13, 2018 at 10:35 AM, dwight herkness via chirp_users < chirp_users@intrepid.danplanet.com> wrote:
That works thanks!
Sent from Yahoo Mail on Android https://go.onelink.me/107872968?pid=InProduct&c=Global_Internal_YGrowth_AndroidEmailSig__AndroidUsers&af_wl=ym&af_sub1=Internal&af_sub2=Global_YGrowth&af_sub3=EmailSignature
On Sun, May 13, 2018 at 8:15 AM, Jim Unroe rock.unroe@gmail.com wrote: On Sun, May 13, 2018 at 11:00 AM, dwight herkness via chirp_users
chirp_users@intrepid.danplanet.com wrote:
I have the same problem with my baofeng..did you get any feedback?
Adding channel names does not cause them to appear. You must also edit the Memory Display Format of the corresponding display line to enable the display of channel names.
Using the CHIRP UI, the settings would be:
For the top display line: Settings -> Basic Settings -> Display Mode (A):
For the bottom display line: Settings -> Basic Settings -> Display Mode (B):
The choices are Channel, Name and Frequency
Using the redio's menu system, the settings would be:
For the top display line: Menu 21 (MDF-A)
For the top display line: Menu 22 (MDF-B)
The choices are CH, NAME and FREQ
After making any changes from the radio's menu system, remember to download the changes to CHIRP. Otherwise you next upload may return the settings to the way they were previously.
Detailed menu definitions: http://www.miklor.com/COM/UV_MenuDef.php
Jim KC9HI
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Dennis Wage at dwage@dwage.com To unsubscribe, send an email to chirp_users-unsubscribe@ intrepid.danplanet.com
participants (5)
-
Darby Collier -
Dave Felt -
Dennis Wage -
dwight herkness -
Jim Unroe