Bob: Perfect! Thank you. Jay

On Wed, Feb 3, 2021, 05:08 Robert Ankenbauer bobank03@gmail.com wrote:

Jay,

Under supported radios

https://chirp.danplanet.com/projects/chirp/wiki/Supported_Radios

The UV-S9 should work if you use the BF-F8HP

Thanks,

Bob

On Tue, Feb 2, 2021 at 9:11 PM Jay Trobec jay@trobec.net wrote:

...

Hi. Is there a clone available for the BaoFeng UV-S9 PLUS Tri-Band10W? I've been trying various options but haven't been able to find anything that works. JT

On Tue, Feb 2, 2021 at 8:06 PM Jay Trobec jay@trobec.net wrote:

...

Hi. Is there a clone available for the BaoFeng UV-S9 PLUS Tri-Band10W? I've been trying various options but haven't been able to find anything that works. JT

-- *Jay Trobec, Ph.D., CBM, CCM*

Chief Meteorologist, KELO-TV 501 South Phillips Ave Sioux Falls, SD 57104 (605) 610-8414 jaytrobec.com

---

chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Bob at bobank03@gmail.com To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com

---

chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Jay Trobec at jay@trobec.net To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com