Hello all:
Using the latest CHIRP (daily build 20150702) on a group of BaoFeng UV-82C. The last one I received causes Chirp to quit unexpectedly when I try to upload an image. I can download from the radio and upload new settings but not the cloned image from the other four UV-82C’s that I use.
The program crashes and quits within the first 3 seconds of attempting an image upload to this one radio. I’m using MacOSX (10.10.4).
Firmware is US2S25 on all five UV-82Cs.
Any help appreciated.
James
James I have had the same problems with windows and when I did as follows it would work. You may have to download from the radio and use copy paste to the download frequencies from earlier models baofeng is updating the firmware on some radios so it is not compatible with other radios of the same model number.
Danny On Wed, 8 Jul 2015 10:04:08 -0400, James Li wb7qni@gmail.com wrote:
Hello all:
Using the latest CHIRP (daily build 20150702) on a group of BaoFeng UV-82C. The last one I received causes Chirp to quit unexpectedly when I try to upload an image. I can download from the radio and upload new settings but not the cloned image from the other four UV-82C’s that I
use.
The program crashes and quits within the first 3 seconds of attempting
an
image upload to this one radio. I’m using MacOSX (10.10.4).
Firmware is US2S25 on all five UV-82Cs.
Any help appreciated.
James _______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com
How about including a debug log from the radio that won't cooperate?
http://chirp.danplanet.com/projects/chirp/wiki/How_to_report_issues
Jim KC9HI
On Wed, Jul 8, 2015 at 10:04 AM, James Li wb7qni@gmail.com wrote:
Hello all:
Using the latest CHIRP (daily build 20150702) on a group of BaoFeng UV-82C. The last one I received causes Chirp to quit unexpectedly when I try to upload an image. I can download from the radio and upload new settings but not the cloned image from the other four UV-82C’s that I use.
The program crashes and quits within the first 3 seconds of attempting an image upload to this one radio. I’m using MacOSX (10.10.4).
Firmware is US2S25 on all five UV-82Cs.
Any help appreciated.
James _______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com
participants (3)
-
dwsexton＠scrtc.com -
James Li -
Jim Unroe