You wouldn't program via CHIRP, but use a rig control program, such as HamRadioDeluxe or similar.

On Mon, Aug 22, 2022 at 3:42 PM paul lewis via chirp_users < chirp_users@intrepid.danplanet.com> wrote:

Ok many thanks for quick response 73

Sent from Sky Yahoo Mail for iPhone https://overview.mail.yahoo.com/?.src=iOS

On Monday, August 22, 2022, 8:38 pm, Jim Unroe rock.unroe@gmail.com wrote:

On Mon, Aug 22, 2022 at 3:24 PM paul lewis via chirp_users

chirp_users@intrepid.danplanet.com wrote:

...

Hi is this Kenwood model programmable on chirp please? I have two ex site radios and want to program to 2m and some repeat

(136-174)

...

Thank you

2E0ORS Paul

It isn't listed in the Supported Radio Models list. It is a pretty safe bet that it is not supported.

Jim KC9HI

---

chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to W5NNH at kemkerj3@gmail.com To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com To report this email as off-topic, please email chirp_users-owner@intrepid.danplanet.com Searchable archive: https://www.mail-archive.com/chirp_users@intrepid.danplanet.com