[chirp_users] Been trying to figure out how to program IC-7100 for almost a year now
hi all,
As I've mentioned above, Been trying to figure out how to program IC-7100 for almost a year now. I've followed the live mode radio "import/export" directions as well as the instructions outlined in Bug #7807. I cannot get the radio to accept any input or programming whatsoever. I'm using the latest version and daily update on a raspberry pi 400.
Is there anyone who can provide me with or direct me to a step by step guide for programming an Icom IC-7100? Thanks in advance,
Conor KI7CRG
To start with, does your pi communicate with the radio at all?
On Thu, Feb 17, 2022, 10:59 AM Thomas Burns t.conor.burns81@gmail.com wrote:
hi all,
As I've mentioned above, Been trying to figure out how to program IC-7100 for almost a year now. I've followed the live mode radio "import/export" directions as well as the instructions outlined in Bug #7807. I cannot get the radio to accept any input or programming whatsoever. I'm using the latest version and daily update on a raspberry pi 400.
Is there anyone who can provide me with or direct me to a step by step guide for programming an Icom IC-7100? Thanks in advance,
Conor KI7CRG _______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Dan at dgberry@gmail.com To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com To report this email as off-topic, please email chirp_users-owner@intrepid.danplanet.com
Yes, it'll read the radio but I can't input anything into the radio
On Thu, Feb 17, 2022, 11:05 Dan Berry dgberry@gmail.com wrote:
To start with, does your pi communicate with the radio at all?
On Thu, Feb 17, 2022, 10:59 AM Thomas Burns t.conor.burns81@gmail.com wrote:
hi all,
As I've mentioned above, Been trying to figure out how to program IC-7100 for almost a year now. I've followed the live mode radio "import/export" directions as well as the instructions outlined in Bug #7807. I cannot get the radio to accept any input or programming whatsoever. I'm using the latest version and daily update on a raspberry pi 400.
Is there anyone who can provide me with or direct me to a step by step guide for programming an Icom IC-7100? Thanks in advance,
Conor KI7CRG _______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Dan at dgberry@gmail.com To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com To report this email as off-topic, please email chirp_users-owner@intrepid.danplanet.com
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Conor KI7CRG at t.conor.burns81@gmail.com To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com To report this email as off-topic, please email chirp_users-owner@intrepid.danplanet.com
I found I have to modify the IMG file that you download, directly in Chirp. Copy the IMG file or save it as a new name.
Import the csv into the IMG file using the chirp import tool. Don't open it in a spreadsheet and cut and paste. Doing that never worked for me.
Then try importing.
Dan KI7TQX
On Thu, Feb 17, 2022, 1:54 PM Thomas Burns t.conor.burns81@gmail.com wrote:
Yes, it'll read the radio but I can't input anything into the radio
On Thu, Feb 17, 2022, 11:05 Dan Berry dgberry@gmail.com wrote:
To start with, does your pi communicate with the radio at all?
On Thu, Feb 17, 2022, 10:59 AM Thomas Burns t.conor.burns81@gmail.com wrote:
hi all,
As I've mentioned above, Been trying to figure out how to program IC-7100 for almost a year now. I've followed the live mode radio "import/export" directions as well as the instructions outlined in Bug #7807. I cannot get the radio to accept any input or programming whatsoever. I'm using the latest version and daily update on a raspberry pi 400.
Is there anyone who can provide me with or direct me to a step by step guide for programming an Icom IC-7100? Thanks in advance,
Conor KI7CRG _______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Dan at dgberry@gmail.com To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com To report this email as off-topic, please email chirp_users-owner@intrepid.danplanet.com
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Conor KI7CRG at t.conor.burns81@gmail.com To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com To report this email as off-topic, please email chirp_users-owner@intrepid.danplanet.com
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Dan at dgberry@gmail.com To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com To report this email as off-topic, please email chirp_users-owner@intrepid.danplanet.com
See if you can import the exact same IMG you exported first. Then do the steps I outlined in the previous email.
Dan KI7TQX
On Thu, Feb 17, 2022, 1:54 PM Thomas Burns t.conor.burns81@gmail.com wrote:
Yes, it'll read the radio but I can't input anything into the radio
On Thu, Feb 17, 2022, 11:05 Dan Berry dgberry@gmail.com wrote:
To start with, does your pi communicate with the radio at all?
On Thu, Feb 17, 2022, 10:59 AM Thomas Burns t.conor.burns81@gmail.com wrote:
hi all,
As I've mentioned above, Been trying to figure out how to program IC-7100 for almost a year now. I've followed the live mode radio "import/export" directions as well as the instructions outlined in Bug #7807. I cannot get the radio to accept any input or programming whatsoever. I'm using the latest version and daily update on a raspberry pi 400.
Is there anyone who can provide me with or direct me to a step by step guide for programming an Icom IC-7100? Thanks in advance,
Conor KI7CRG _______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Dan at dgberry@gmail.com To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com To report this email as off-topic, please email chirp_users-owner@intrepid.danplanet.com
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Conor KI7CRG at t.conor.burns81@gmail.com To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com To report this email as off-topic, please email chirp_users-owner@intrepid.danplanet.com
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Dan at dgberry@gmail.com To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com To report this email as off-topic, please email chirp_users-owner@intrepid.danplanet.com
Dan, That's what I do with normal radios. The IC-7100 is a "live mode" radio.
From what I understand, it uploads changes to the memory as you add them.
When you read from the radio, it lists the memory blocks one at a time. Does the method you mentioned work like that with live mode radios?
On Thu, Feb 17, 2022, 14:24 Dan Berry dgberry@gmail.com wrote:
See if you can import the exact same IMG you exported first. Then do the steps I outlined in the previous email.
Dan KI7TQX
On Thu, Feb 17, 2022, 1:54 PM Thomas Burns t.conor.burns81@gmail.com wrote:
Yes, it'll read the radio but I can't input anything into the radio
On Thu, Feb 17, 2022, 11:05 Dan Berry dgberry@gmail.com wrote:
To start with, does your pi communicate with the radio at all?
On Thu, Feb 17, 2022, 10:59 AM Thomas Burns t.conor.burns81@gmail.com wrote:
hi all,
As I've mentioned above, Been trying to figure out how to program IC-7100 for almost a year now. I've followed the live mode radio "import/export" directions as well as the instructions outlined in Bug #7807. I cannot get the radio to accept any input or programming whatsoever. I'm using the latest version and daily update on a raspberry pi 400.
Is there anyone who can provide me with or direct me to a step by step guide for programming an Icom IC-7100? Thanks in advance,
Conor KI7CRG _______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Dan at dgberry@gmail.com To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com To report this email as off-topic, please email chirp_users-owner@intrepid.danplanet.com
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Conor KI7CRG at t.conor.burns81@gmail.com To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com To report this email as off-topic, please email chirp_users-owner@intrepid.danplanet.com
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Dan at dgberry@gmail.com To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com To report this email as off-topic, please email chirp_users-owner@intrepid.danplanet.com
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Conor KI7CRG at t.conor.burns81@gmail.com To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com To report this email as off-topic, please email chirp_users-owner@intrepid.danplanet.com
I don't have a live radio. I have to do it the way I outlined.
You might see if you can upload direct from Repeater book. There looks to be ICOM radio support in the phone app for it.
On Thu, Feb 17, 2022, 2:30 PM Thomas Burns t.conor.burns81@gmail.com wrote:
Dan, That's what I do with normal radios. The IC-7100 is a "live mode" radio. From what I understand, it uploads changes to the memory as you add them. When you read from the radio, it lists the memory blocks one at a time. Does the method you mentioned work like that with live mode radios?
On Thu, Feb 17, 2022, 14:24 Dan Berry dgberry@gmail.com wrote:
See if you can import the exact same IMG you exported first. Then do the steps I outlined in the previous email.
Dan KI7TQX
On Thu, Feb 17, 2022, 1:54 PM Thomas Burns t.conor.burns81@gmail.com wrote:
Yes, it'll read the radio but I can't input anything into the radio
On Thu, Feb 17, 2022, 11:05 Dan Berry dgberry@gmail.com wrote:
To start with, does your pi communicate with the radio at all?
On Thu, Feb 17, 2022, 10:59 AM Thomas Burns t.conor.burns81@gmail.com wrote:
hi all,
As I've mentioned above, Been trying to figure out how to program IC-7100 for almost a year now. I've followed the live mode radio "import/export" directions as well as the instructions outlined in Bug #7807. I cannot get the radio to accept any input or programming whatsoever. I'm using the latest version and daily update on a raspberry pi 400.
Is there anyone who can provide me with or direct me to a step by step guide for programming an Icom IC-7100? Thanks in advance,
Conor KI7CRG _______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Dan at dgberry@gmail.com To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com To report this email as off-topic, please email chirp_users-owner@intrepid.danplanet.com
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Conor KI7CRG at t.conor.burns81@gmail.com To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com To report this email as off-topic, please email chirp_users-owner@intrepid.danplanet.com
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Dan at dgberry@gmail.com To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com To report this email as off-topic, please email chirp_users-owner@intrepid.danplanet.com
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Conor KI7CRG at t.conor.burns81@gmail.com To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com To report this email as off-topic, please email chirp_users-owner@intrepid.danplanet.com
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Dan at dgberry@gmail.com To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com To report this email as off-topic, please email chirp_users-owner@intrepid.danplanet.com
I see that the IC-7100 support was added years ago:
https://chirp.danplanet.com/issues/1003
But I suspect you may have better luck on an IC-7100 specific email reflector, like this group:
Then on this list.
Good luck, I'm curious to learn what the issue is, please follow-up to this group once you solve the problem.
Thanks,
Ken, N2VIP
On Feb 17, 2022, at 11:58, Thomas Burns t.conor.burns81@gmail.com wrote:
hi all,
As I've mentioned above, Been trying to figure out how to program IC-7100 for almost a year now. I've followed the live mode radio "import/export" directions as well as the instructions outlined in Bug #7807. I cannot get the radio to accept any input or programming whatsoever. I'm using the latest version and daily update on a raspberry pi 400.
Is there anyone who can provide me with or direct me to a step by step guide for programming an Icom IC-7100? Thanks in advance,
Conor KI7CRG _______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Ken Hansen at ken@n2vip.org To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com To report this email as off-topic, please email chirp_users-owner@intrepid.danplanet.com
I've followed the live mode radio "import/export" directions
Which directions are you trying to follow?
With a live mode radio, you can just edit a memory and it is immediately written back to the radio. Does that work? If not, what kind of errors are you seeing?
as well as the instructions outlined in Bug #7807
That bug relates to a Baofeng UV-82. Presumably you meant a different issue?
Martin. KD6YAM
On Thu, Feb 17, 2022 at 9:59 AM Thomas Burns t.conor.burns81@gmail.com wrote:
hi all,
As I've mentioned above, Been trying to figure out how to program IC-7100 for almost a year now. I've followed the live mode radio "import/export" directions as well as the instructions outlined in Bug #7807. I cannot get the radio to accept any input or programming whatsoever. I'm using the latest version and daily update on a raspberry pi 400.
Is there anyone who can provide me with or direct me to a step by step guide for programming an Icom IC-7100? Thanks in advance,
Conor KI7CRG _______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Martin Cooper at mfncooper@gmail.com To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com To report this email as off-topic, please email chirp_users-owner@intrepid.danplanet.com
Martin, Yes, I meant #8707
On Thu, Feb 17, 2022, 14:41 Martin Cooper mfncooper@gmail.com wrote:
I've followed the live mode radio "import/export" directions
Which directions are you trying to follow?
With a live mode radio, you can just edit a memory and it is immediately written back to the radio. Does that work? If not, what kind of errors are you seeing?
as well as the instructions outlined in Bug #7807
That bug relates to a Baofeng UV-82. Presumably you meant a different issue?
Martin. KD6YAM
On Thu, Feb 17, 2022 at 9:59 AM Thomas Burns t.conor.burns81@gmail.com wrote:
hi all,
As I've mentioned above, Been trying to figure out how to program IC-7100 for almost a year now. I've followed the live mode radio "import/export" directions as well as the instructions outlined in Bug #7807. I cannot get the radio to accept any input or programming whatsoever. I'm using the latest version and daily update on a raspberry pi 400.
Is there anyone who can provide me with or direct me to a step by step guide for programming an Icom IC-7100? Thanks in advance,
Conor KI7CRG _______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Martin Cooper at mfncooper@gmail.com To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com To report this email as off-topic, please email chirp_users-owner@intrepid.danplanet.com
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Conor KI7CRG at t.conor.burns81@gmail.com To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com To report this email as off-topic, please email chirp_users-owner@intrepid.danplanet.com
Martin, When I connect to the radio, it downloads the memory one at a time. If I click on anything in the frequencies column, say I try to type in 146.640, it takes me to memory number 14 before I can type in the 6. I followed the live mode instructions on the "wiki page", towards the bottom of the page, amongst other things.
On Thu, Feb 17, 2022, 16:19 Thomas Burns t.conor.burns81@gmail.com wrote:
Martin, Yes, I meant #8707
On Thu, Feb 17, 2022, 14:41 Martin Cooper mfncooper@gmail.com wrote:
I've followed the live mode radio "import/export" directions
Which directions are you trying to follow?
With a live mode radio, you can just edit a memory and it is immediately written back to the radio. Does that work? If not, what kind of errors are you seeing?
as well as the instructions outlined in Bug #7807
That bug relates to a Baofeng UV-82. Presumably you meant a different issue?
Martin. KD6YAM
On Thu, Feb 17, 2022 at 9:59 AM Thomas Burns t.conor.burns81@gmail.com wrote:
hi all,
As I've mentioned above, Been trying to figure out how to program IC-7100 for almost a year now. I've followed the live mode radio "import/export" directions as well as the instructions outlined in Bug #7807. I cannot get the radio to accept any input or programming whatsoever. I'm using the latest version and daily update on a raspberry pi 400.
Is there anyone who can provide me with or direct me to a step by step guide for programming an Icom IC-7100? Thanks in advance,
Conor KI7CRG _______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Martin Cooper at mfncooper@gmail.com To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com To report this email as off-topic, please email chirp_users-owner@intrepid.danplanet.com
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Conor KI7CRG at t.conor.burns81@gmail.com To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com To report this email as off-topic, please email chirp_users-owner@intrepid.danplanet.com
When I connect to the radio, it downloads the memory one at a time.
I presume you mean that it populates the Memories page with all of the memories from your radio, showing all the columns with their current values.
If I click on anything in the frequencies column, say I try to type in
146.640, it takes me to memory number 14 before I can type in the 6.
You're trying to edit the memory in place in the Memories page, right? That is very strange. I'm using a live mode radio that uses the same Chirp driver, and that does not happen when I edit the frequency in place.
What happens if you right-click on a memory and select Properties from the context menu? Can you edit the memory successfully from the dialog window that appears?
I followed the live mode instructions on the "wiki page", towards the
bottom of the page, amongst other things.
There are 35 wiki pages, which is why I was asking. I'm not clear on which page you are looking at. Perhaps you could post the URL or the page title.
Regardless, it's very strange that you can't type directly into the fields in the Memories page. What is the exact daily build of Chirp that you're running?
Martin. KD6YAM
On Thu, Feb 17, 2022, 16:19 Thomas Burns t.conor.burns81@gmail.com wrote:
Martin, Yes, I meant #8707
On Thu, Feb 17, 2022, 14:41 Martin Cooper mfncooper@gmail.com wrote:
I've followed the live mode radio "import/export" directions
Which directions are you trying to follow?
With a live mode radio, you can just edit a memory and it is immediately written back to the radio. Does that work? If not, what kind of errors are you seeing?
as well as the instructions outlined in Bug #7807
That bug relates to a Baofeng UV-82. Presumably you meant a different issue?
Martin. KD6YAM
On Thu, Feb 17, 2022 at 9:59 AM Thomas Burns t.conor.burns81@gmail.com wrote:
hi all,
As I've mentioned above, Been trying to figure out how to program IC-7100 for almost a year now. I've followed the live mode radio "import/export" directions as well as the instructions outlined in Bug #7807. I cannot get the radio to accept any input or programming whatsoever. I'm using the latest version and daily update on a raspberry pi 400.
Is there anyone who can provide me with or direct me to a step by step guide for programming an Icom IC-7100? Thanks in advance,
Conor KI7CRG _______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Martin Cooper at mfncooper@gmail.com To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com To report this email as off-topic, please email chirp_users-owner@intrepid.danplanet.com
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Conor KI7CRG at t.conor.burns81@gmail.com To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com To report this email as off-topic, please email chirp_users-owner@intrepid.danplanet.com
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Martin Cooper at mfncooper@gmail.com To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com To report this email as off-topic, please email chirp_users-owner@intrepid.danplanet.com
Why don't you just get a new, different model, radio?
On Thu, Feb 17, 2022 at 6:56 PM Martin Cooper mfncooper@gmail.com wrote:
When I connect to the radio, it downloads the memory one at a time.
I presume you mean that it populates the Memories page with all of the memories from your radio, showing all the columns with their current values.
If I click on anything in the frequencies column, say I try to type in
146.640, it takes me to memory number 14 before I can type in the 6.
You're trying to edit the memory in place in the Memories page, right? That is very strange. I'm using a live mode radio that uses the same Chirp driver, and that does not happen when I edit the frequency in place.
What happens if you right-click on a memory and select Properties from the context menu? Can you edit the memory successfully from the dialog window that appears?
I followed the live mode instructions on the "wiki page", towards the
bottom of the page, amongst other things.
There are 35 wiki pages, which is why I was asking. I'm not clear on which page you are looking at. Perhaps you could post the URL or the page title.
Regardless, it's very strange that you can't type directly into the fields in the Memories page. What is the exact daily build of Chirp that you're running?
Martin. KD6YAM
On Thu, Feb 17, 2022, 16:19 Thomas Burns t.conor.burns81@gmail.com
wrote:
Martin, Yes, I meant #8707
On Thu, Feb 17, 2022, 14:41 Martin Cooper mfncooper@gmail.com wrote:
I've followed the live mode radio "import/export" directions
Which directions are you trying to follow?
With a live mode radio, you can just edit a memory and it is immediately written back to the radio. Does that work? If not, what kind of errors are you seeing?
as well as the instructions outlined in Bug #7807
That bug relates to a Baofeng UV-82. Presumably you meant a different issue?
Martin. KD6YAM
On Thu, Feb 17, 2022 at 9:59 AM Thomas Burns t.conor.burns81@gmail.com wrote:
hi all,
As I've mentioned above, Been trying to figure out how to program IC-7100 for almost a year now. I've followed the live mode radio "import/export" directions as well as the instructions outlined in Bug #7807. I cannot get the radio to accept any input or programming whatsoever. I'm using the latest version and daily update on a raspberry pi 400.
Is there anyone who can provide me with or direct me to a step by step guide for programming an Icom IC-7100? Thanks in advance,
Conor KI7CRG _______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Martin Cooper at mfncooper@gmail.com To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com To report this email as off-topic, please email chirp_users-owner@intrepid.danplanet.com
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Conor KI7CRG at t.conor.burns81@gmail.com To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com To report this email as off-topic, please email chirp_users-owner@intrepid.danplanet.com
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Martin Cooper at mfncooper@gmail.com To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com To report this email as off-topic, please email chirp_users-owner@intrepid.danplanet.com
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to BOB JETER at 904jeter@gmail.com To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com To report this email as off-topic, please email chirp_users-owner@intrepid.danplanet.com
And, I suppose you have an idea of where he can find a good home for that radio, huh?
Joe Pizzi KI5LST
From: chirp_users-bounces@intrepid.danplanet.com chirp_users-bounces@intrepid.danplanet.com On Behalf Of Bob and Mary Jeter Sent: Thursday, February 17, 2022 7:15 PM To: Discussion of CHIRP chirp_users@intrepid.danplanet.com Subject: Re: [chirp_users] Been trying to figure out how to program IC-7100 for almost a year now
Why don't you just get a new, different model, radio?
On Thu, Feb 17, 2022 at 6:56 PM Martin Cooper <mfncooper@gmail.com mailto:mfncooper@gmail.com > wrote:
When I connect to the radio, it downloads the memory one at a time.
I presume you mean that it populates the Memories page with all of the memories from your radio, showing all the columns with their current values.
If I click on anything in the frequencies column, say I try to type in 146.640, it takes me to memory number 14 before I can type in the 6.
You're trying to edit the memory in place in the Memories page, right? That is very strange. I'm using a live mode radio that uses the same Chirp driver, and that does not happen when I edit the frequency in place.
What happens if you right-click on a memory and select Properties from the context menu? Can you edit the memory successfully from the dialog window that appears?
I followed the live mode instructions on the "wiki page", towards the bottom of the page, amongst other things.
There are 35 wiki pages, which is why I was asking. I'm not clear on which page you are looking at. Perhaps you could post the URL or the page title.
Regardless, it's very strange that you can't type directly into the fields in the Memories page. What is the exact daily build of Chirp that you're running?
Martin.
KD6YAM
On Thu, Feb 17, 2022, 16:19 Thomas Burns <t.conor.burns81@gmail.com mailto:t.conor.burns81@gmail.com > wrote:
Martin,
Yes, I meant #8707
On Thu, Feb 17, 2022, 14:41 Martin Cooper <mfncooper@gmail.com mailto:mfncooper@gmail.com > wrote:
I've followed the live mode radio "import/export" directions
Which directions are you trying to follow?
With a live mode radio, you can just edit a memory and it is immediately written back to the radio. Does that work? If not, what kind of errors are you seeing?
as well as the instructions outlined in Bug #7807
That bug relates to a Baofeng UV-82. Presumably you meant a different issue?
Martin.
KD6YAM
On Thu, Feb 17, 2022 at 9:59 AM Thomas Burns <t.conor.burns81@gmail.com mailto:t.conor.burns81@gmail.com > wrote:
hi all,
As I've mentioned above, Been trying to figure out how to program IC-7100 for almost a year now. I've followed the live mode radio "import/export" directions as well as the instructions outlined in Bug #7807. I cannot get the radio to accept any input or programming whatsoever.
I'm using the latest version and daily update on a raspberry pi 400.
Is there anyone who can provide me with or direct me to a step by step guide for programming an Icom IC-7100? Thanks in advance,
Conor
KI7CRG
_______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com mailto:chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Martin Cooper at mfncooper@gmail.com mailto:mfncooper@gmail.com To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com mailto:chirp_users-unsubscribe@intrepid.danplanet.com To report this email as off-topic, please email chirp_users-owner@intrepid.danplanet.com mailto:chirp_users-owner@intrepid.danplanet.com
_______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com mailto:chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Conor KI7CRG at t.conor.burns81@gmail.com mailto:t.conor.burns81@gmail.com To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com mailto:chirp_users-unsubscribe@intrepid.danplanet.com To report this email as off-topic, please email chirp_users-owner@intrepid.danplanet.com mailto:chirp_users-owner@intrepid.danplanet.com
_______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com mailto:chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Martin Cooper at mfncooper@gmail.com mailto:mfncooper@gmail.com To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com mailto:chirp_users-unsubscribe@intrepid.danplanet.com To report this email as off-topic, please email chirp_users-owner@intrepid.danplanet.com mailto:chirp_users-owner@intrepid.danplanet.com
_______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com mailto:chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to BOB JETER at 904jeter@gmail.com mailto:904jeter@gmail.com To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com mailto:chirp_users-unsubscribe@intrepid.danplanet.com To report this email as off-topic, please email chirp_users-owner@intrepid.danplanet.com mailto:chirp_users-owner@intrepid.danplanet.com
participants (6)
-
Bob and Mary Jeter -
Dan Berry -
Joe Pizzi -
Ken Hansen -
Martin Cooper -
Thomas Burns