[chirp_users] Port recognition issue
I downloaded CHIRP. Plugged my computer cable to a USB port on my computer and got an Error 3 message saying this port is not recognized. No driver. I use this port all the time. I purchased the cable from Amazon as being the one to buy for my Btech 50+1 radio. Help would be appreciated.--*Your pal. That sweet fella you love, Mr. Dos XX's himself, Dennis, Den, Denny, Dad, Pops, Grandpa, Uncle, Cousin, Mr. Mosley, Moe, Comrade, etc.*
Hi Dennis,
On Wed, Aug 18, 2021 at 11:03 AM Dennis Mosley mdenmos6@gmail.com wrote:
I downloaded CHIRP. Plugged my computer cable to a USB port on my
computer and got an Error 3 message saying this port is not recognized. No driver.
I use this port all the time. I purchased the cable from Amazon as being
the one to buy for my Btech 50+1 radio.
Help would be appreciated.--Your pal. That sweet fella you love, Mr. Dos
XX's himself, Dennis, Den, Denny, Dad, Pops, Grandpa, Uncle, Cousin, Mr. Mosley, Moe, Comrade, etc.
You are most likely choosing the wrong port. Which port does Device Manager show as the port assigned to your programming cable? That is the one you must use.
Jim KC9HI
Hmmm. Device Manager says: Port_#0003.Hub_#0001 When I copy and paste that into CHIRP I get an error message: could not open port Port_#0003.Hub_#0001: [Error 2] The system cannot find the file specified
On Wed, Aug 18, 2021 at 11:16 AM Jim Unroe rock.unroe@gmail.com wrote:
Hi Dennis,
On Wed, Aug 18, 2021 at 11:03 AM Dennis Mosley mdenmos6@gmail.com wrote:
I downloaded CHIRP. Plugged my computer cable to a USB port on my
computer and got an Error 3 message saying this port is not recognized. No driver.
I use this port all the time. I purchased the cable from Amazon as being
the one to buy for my Btech 50+1 radio.
Help would be appreciated.--Your pal. That sweet fella you love, Mr. Dos
XX's himself, Dennis, Den, Denny, Dad, Pops, Grandpa, Uncle, Cousin, Mr. Mosley, Moe, Comrade, etc.
You are most likely choosing the wrong port. Which port does Device Manager show as the port assigned to your programming cable? That is the one you must use.
Jim KC9HI
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Dennis Watt Mosley at mdenmos6@gmail.com To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com
The way to tell which port is being used in Device Manager, is either plug in the cable with device manager open, and see what appears, or unplug the cord with device manager open, and see what goes away. HTH.
Glenn ----- Original Message ----- From: Dennis Mosley To: Discussion of CHIRP Sent: Wednesday, August 18, 2021 11:15 AM Subject: Re: [chirp_users] Port recognition issue
Hmmm. Device Manager says: Port_#0003.Hub_#0001
When I copy and paste that into CHIRP I get an error message: could not open port Port_#0003.Hub_#0001: [Error 2] The system cannot find the file specified
On Wed, Aug 18, 2021 at 11:16 AM Jim Unroe rock.unroe@gmail.com wrote:
Hi Dennis,
On Wed, Aug 18, 2021 at 11:03 AM Dennis Mosley mdenmos6@gmail.com wrote: > > I downloaded CHIRP. Plugged my computer cable to a USB port on my computer and got an Error 3 message saying this port is not recognized. No driver. > I use this port all the time. I purchased the cable from Amazon as being the one to buy for my Btech 50+1 radio.
> Help would be appreciated.--Your pal. That sweet fella you love, Mr. Dos XX's himself, Dennis, Den, Denny, Dad, Pops, Grandpa, Uncle, Cousin, Mr. Mosley, Moe, Comrade, etc.
You are most likely choosing the wrong port. Which port does Device Manager show as the port assigned to your programming cable? That is the one you must use.
Jim KC9HI
_______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Dennis Watt Mosley at mdenmos6@gmail.com To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com
--
Your pal. That sweet fella you love, Mr. Dos XX's himself, Dennis, Den, Denny, Dad, Pops, Grandpa, Uncle, Cousin, Mr. Mosley, Moe, Comrade, etc.
------------------------------------------------------------------------------
_______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to K0LNY at glenn@ervin.email To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com
I plugged a USB card reader into that port on the front of the computer and it says that port is F: Then I plugged in the cable and it says nothing. Doesn't even recognize that port. Its supposed to be the cable needed to connect my Btech 50+1 GMRS radio. I saw a video on YouTube saying the correct cable has a chip inside of it. I bought the one recommended by Amazon for the radio. https://www.amazon.com/gp/product/B017MT7IFG/ref=ppx_yo_dt_b_asin_image_o03_s00?ie=UTF8&psc=1 BTECH PC04 FTDI USB Programming Cable for UV-25X2, UV-25X4, UV-50X2 https://www.amazon.com/gp/product/B017MT7IFG/ref=ppx_yo_dt_b_asin_title_o03_s00?ie=UTF8&psc=1
As you can tell I am brand new to GMRS radio. I'm also 75 yrs old which isn't helping and I don't have a teenager. I was in the Army Security Agency and used radios but that was years ago. I know nothing really about GMRS.
On Wed, Aug 18, 2021 at 12:39 PM K0LNY glenn@ervin.email wrote:
The way to tell which port is being used in Device Manager, is either plug in the cable with device manager open, and see what appears, or unplug the cord with device manager open, and see what goes away. HTH.
Glenn
----- Original Message ----- *From:* Dennis Mosley mdenmos6@gmail.com *To:* Discussion of CHIRP chirp_users@intrepid.danplanet.com *Sent:* Wednesday, August 18, 2021 11:15 AM *Subject:* Re: [chirp_users] Port recognition issue
Hmmm. Device Manager says: Port_#0003.Hub_#0001 When I copy and paste that into CHIRP I get an error message: could not open port Port_#0003.Hub_#0001: [Error 2] The system cannot find the file specified
On Wed, Aug 18, 2021 at 11:16 AM Jim Unroe rock.unroe@gmail.com wrote:
Hi Dennis,
On Wed, Aug 18, 2021 at 11:03 AM Dennis Mosley mdenmos6@gmail.com wrote:
I downloaded CHIRP. Plugged my computer cable to a USB port on my
computer and got an Error 3 message saying this port is not recognized. No driver.
I use this port all the time. I purchased the cable from Amazon as
being the one to buy for my Btech 50+1 radio.
Help would be appreciated.--Your pal. That sweet fella you love, Mr.
Dos XX's himself, Dennis, Den, Denny, Dad, Pops, Grandpa, Uncle, Cousin, Mr. Mosley, Moe, Comrade, etc.
You are most likely choosing the wrong port. Which port does Device Manager show as the port assigned to your programming cable? That is the one you must use.
Jim KC9HI
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Dennis Watt Mosley at mdenmos6@gmail.com To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com
--
*Your pal. That sweet fella you love, Mr. Dos XX's himself, Dennis, Den, Denny, Dad, Pops, Grandpa, Uncle, Cousin, Mr. Mosley, Moe, Comrade, etc.*
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to K0LNY at glenn@ervin.email To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Dennis Watt Mosley at mdenmos6@gmail.com To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com
Hi, you cannot tell by plugging in a card reader, in fact, you will get the same results with all USB ports. You have to do this with the cable in question, and windows will assign a com port for the cable to communicate with windows. Glenn ----- Original Message ----- From: Dennis Mosley To: Discussion of CHIRP Sent: Wednesday, August 18, 2021 12:02 PM Subject: Re: [chirp_users] Port recognition issue
I plugged a USB card reader into that port on the front of the computer and it says that port is F: Then I plugged in the cable and it says nothing. Doesn't even recognize that port. Its supposed to be the cable needed to connect my Btech 50+1 GMRS radio. I saw a video on YouTube saying the correct cable has a chip inside of it. I bought the one recommended by Amazon for the radio. BTECH PC04 FTDI USB Programming Cable for UV-25X2, UV-25X4, UV-50X2
As you can tell I am brand new to GMRS radio. I'm also 75 yrs old which isn't helping and I don't have a teenager. I was in the Army Security Agency and used radios but that was years ago. I know nothing really about GMRS.
On Wed, Aug 18, 2021 at 12:39 PM K0LNY glenn@ervin.email wrote:
The way to tell which port is being used in Device Manager, is either plug in the cable with device manager open, and see what appears, or unplug the cord with device manager open, and see what goes away. HTH.
Glenn ----- Original Message ----- From: Dennis Mosley To: Discussion of CHIRP Sent: Wednesday, August 18, 2021 11:15 AM Subject: Re: [chirp_users] Port recognition issue
Hmmm. Device Manager says: Port_#0003.Hub_#0001
When I copy and paste that into CHIRP I get an error message: could not open port Port_#0003.Hub_#0001: [Error 2] The system cannot find the file specified
On Wed, Aug 18, 2021 at 11:16 AM Jim Unroe rock.unroe@gmail.com wrote:
Hi Dennis,
On Wed, Aug 18, 2021 at 11:03 AM Dennis Mosley mdenmos6@gmail.com wrote: > > I downloaded CHIRP. Plugged my computer cable to a USB port on my computer and got an Error 3 message saying this port is not recognized. No driver. > I use this port all the time. I purchased the cable from Amazon as being the one to buy for my Btech 50+1 radio.
> Help would be appreciated.--Your pal. That sweet fella you love, Mr. Dos XX's himself, Dennis, Den, Denny, Dad, Pops, Grandpa, Uncle, Cousin, Mr. Mosley, Moe, Comrade, etc.
You are most likely choosing the wrong port. Which port does Device Manager show as the port assigned to your programming cable? That is the one you must use.
Jim KC9HI
_______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Dennis Watt Mosley at mdenmos6@gmail.com To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com
--
Your pal. That sweet fella you love, Mr. Dos XX's himself, Dennis, Den, Denny, Dad, Pops, Grandpa, Uncle, Cousin, Mr. Mosley, Moe, Comrade, etc.
--------------------------------------------------------------------------
_______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to K0LNY at glenn@ervin.email To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com
_______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Dennis Watt Mosley at mdenmos6@gmail.com To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com
--
Your pal. That sweet fella you love, Mr. Dos XX's himself, Dennis, Den, Denny, Dad, Pops, Grandpa, Uncle, Cousin, Mr. Mosley, Moe, Comrade, etc.
------------------------------------------------------------------------------
_______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to K0LNY at glenn@ervin.email To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com
When you plug in a card reader, F: is the Drive number. This is totally unrelated to the Com Port. You need to open Device Manager on your computer.
See attached
Stay safe and healthy.
John 'Miklor'
K3NXU WQVJ811
From: chirp_users-bounces@intrepid.danplanet.com [mailto:chirp_users-bounces@intrepid.danplanet.com] On Behalf Of Dennis Mosley Sent: Wednesday, August 18, 2021 1:03 PM To: Discussion of CHIRP Subject: Re: [chirp_users] Port recognition issue
I plugged a USB card reader into that port on the front of the computer and it says that port is F:
Then I plugged in the cable and it says nothing. Doesn't even recognize that port.
Its supposed to be the cable needed to connect my Btech 50+1 GMRS radio.
I saw a video on YouTube saying the correct cable has a chip inside of it. I bought the one recommended by Amazon for the radio.
https://www.amazon.com/gp/product/B017MT7IFG/ref=ppx_yo_dt_b_asin_image_o03_s00?ie=UTF8&psc=1
https://www.amazon.com/gp/product/B017MT7IFG/ref=ppx_yo_dt_b_asin_title_o03_s00?ie=UTF8&psc=1 BTECH PC04 FTDI USB Programming Cable for UV-25X2, UV-25X4, UV-50X2
As you can tell I am brand new to GMRS radio. I'm also 75 yrs old which isn't helping and I don't have a teenager.
I was in the Army Security Agency and used radios but that was years ago.
I know nothing really about GMRS.
On Wed, Aug 18, 2021 at 12:39 PM K0LNY glenn@ervin.email wrote:
The way to tell which port is being used in Device Manager, is either plug in the cable with device manager open, and see what appears, or unplug the cord with device manager open, and see what goes away.
HTH.
Glenn
----- Original Message -----
From: Dennis Mosley mailto:mdenmos6@gmail.com
To: Discussion of CHIRP mailto:chirp_users@intrepid.danplanet.com
Sent: Wednesday, August 18, 2021 11:15 AM
Subject: Re: [chirp_users] Port recognition issue
Hmmm. Device Manager says: Port_#0003.Hub_#0001
When I copy and paste that into CHIRP I get an error message:
could not open port Port_#0003.Hub_#0001: [Error 2] The system cannot find the file specified
On Wed, Aug 18, 2021 at 11:16 AM Jim Unroe rock.unroe@gmail.com wrote:
Hi Dennis,
On Wed, Aug 18, 2021 at 11:03 AM Dennis Mosley mdenmos6@gmail.com wrote:
I downloaded CHIRP. Plugged my computer cable to a USB port on my computer and got an Error 3 message saying this port is not recognized. No driver. I use this port all the time. I purchased the cable from Amazon as being the one to buy for my Btech 50+1 radio.
Help would be appreciated.--Your pal. That sweet fella you love, Mr. Dos XX's himself, Dennis, Den, Denny, Dad, Pops, Grandpa, Uncle, Cousin, Mr. Mosley, Moe, Comrade, etc.
You are most likely choosing the wrong port. Which port does Device Manager show as the port assigned to your programming cable? That is the one you must use.
Jim KC9HI
_______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Dennis Watt Mosley at mdenmos6@gmail.com To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com
Will do. Thanks
On Wed, Aug 18, 2021 at 4:28 PM John La JohnLa@usa.net wrote:
When you plug in a card reader, F: is the Drive number. This is totally unrelated to the Com Port. You need to open Device Manager on your computer.
See attached
Stay safe and healthy.
John 'Miklor'
K3NXU WQVJ811
*From:* chirp_users-bounces@intrepid.danplanet.com [mailto: chirp_users-bounces@intrepid.danplanet.com] *On Behalf Of *Dennis Mosley *Sent:* Wednesday, August 18, 2021 1:03 PM *To:* Discussion of CHIRP *Subject:* Re: [chirp_users] Port recognition issue
I plugged a USB card reader into that port on the front of the computer and it says that port is F:
Then I plugged in the cable and it says nothing. Doesn't even recognize that port.
Its supposed to be the cable needed to connect my Btech 50+1 GMRS radio.
I saw a video on YouTube saying the correct cable has a chip inside of it. I bought the one recommended by Amazon for the radio.
https://www.amazon.com/gp/product/B017MT7IFG/ref=ppx_yo_dt_b_asin_image_o03_s00?ie=UTF8&psc=1
BTECH PC04 FTDI USB Programming Cable for UV-25X2, UV-25X4, UV-50X2 https://www.amazon.com/gp/product/B017MT7IFG/ref=ppx_yo_dt_b_asin_title_o03_s00?ie=UTF8&psc=1
As you can tell I am brand new to GMRS radio. I'm also 75 yrs old which isn't helping and I don't have a teenager.
I was in the Army Security Agency and used radios but that was years ago.
I know nothing really about GMRS.
On Wed, Aug 18, 2021 at 12:39 PM K0LNY glenn@ervin.email wrote:
The way to tell which port is being used in Device Manager, is either plug in the cable with device manager open, and see what appears, or unplug the cord with device manager open, and see what goes away.
HTH.
Glenn
----- Original Message -----
*From:* Dennis Mosley mdenmos6@gmail.com
*To:* Discussion of CHIRP chirp_users@intrepid.danplanet.com
*Sent:* Wednesday, August 18, 2021 11:15 AM
*Subject:* Re: [chirp_users] Port recognition issue
Hmmm. Device Manager says: Port_#0003.Hub_#0001
When I copy and paste that into CHIRP I get an error message:
could not open port Port_#0003.Hub_#0001: [Error 2] The system cannot find the file specified
On Wed, Aug 18, 2021 at 11:16 AM Jim Unroe rock.unroe@gmail.com wrote:
Hi Dennis,
On Wed, Aug 18, 2021 at 11:03 AM Dennis Mosley mdenmos6@gmail.com wrote:
I downloaded CHIRP. Plugged my computer cable to a USB port on my
computer and got an Error 3 message saying this port is not recognized. No driver.
I use this port all the time. I purchased the cable from Amazon as being
the one to buy for my Btech 50+1 radio.
Help would be appreciated.--Your pal. That sweet fella you love, Mr. Dos
XX's himself, Dennis, Den, Denny, Dad, Pops, Grandpa, Uncle, Cousin, Mr. Mosley, Moe, Comrade, etc.
You are most likely choosing the wrong port. Which port does Device Manager show as the port assigned to your programming cable? That is the one you must use.
Jim KC9HI
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Dennis Watt Mosley at mdenmos6@gmail.com To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com
--
*Your pal. That sweet fella you love, Mr. Dos XX's himself, Dennis, Den, Denny, Dad, Pops, Grandpa, Uncle, Cousin, Mr. Mosley, Moe, Comrade, etc.*
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to K0LNY at glenn@ervin.email To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Dennis Watt Mosley at mdenmos6@gmail.com To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com
--
*Your pal. That sweet fella you love, Mr. Dos XX's himself, Dennis, Den, Denny, Dad, Pops, Grandpa, Uncle, Cousin, Mr. Mosley, Moe, Comrade, etc.* _______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Dennis Watt Mosley at mdenmos6@gmail.com To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com
participants (4)
-
Dennis Mosley -
Jim Unroe -
John La -
K0LNY