Re: [chirp_users] chirp_users Digest, Vol 126, Issue 7 Chirp

10 Jun 2019

      Jeff,
Instead of using the Baofeng software, use Chirp which is the program this list is designed for.  Go to:  https://chirp.danplanet.com/projects/chirp/wiki/Download  and choose the version for the operating system used on your computer.  Read thru the info on the Chirp website that will help you use the program and also check out http://www.miklor.com/  which supports Chirp use and has lots of good info.  I have used Chirp to program the UV-5R, UV-82C, and UV-82HP.  In fact just this weekend programmed 15 of the UV-82C's.  Had to do some wiggling of the connector on a couple to get them to communicate.  It has to be fully seated and make good contact in the sockets.  There is an article and picture on the Miklor site about having to trim a little on some programming cables to get that to happen.  Welcome to the list and have fun!
73
Gary Craig  KI5CCD
Maintenance
Webco Distribution Texas
750 Martin Luther King Jr Dr
Orange, TX  77630-3094
409-886-0807 ext.107
Fax 918-246-7045
gcraig@webcoindustries.commailto:gcraig@webcoindustries.com
From: chirp_users-bounces@intrepid.danplanet.com chirp_users-bounces@intrepid.danplanet.com On Behalf Of jeff riddlebaugh
Sent: Sunday, June 9, 2019 2:23 PM
To: chirp_users@intrepid.danplanet.com
Subject: Re: [chirp_users] chirp_users Digest, Vol 126, Issue 7
This email originated from an external sender. Use caution when following links or opening attachments as they could be malicious
I cant get any good programing software to work. I downloaded it from Baofeng website for my UV-5R and every funition is mark with ?? signs so I don't know what botton to use. I trird to use UV-3r software but it wont connect with my 5R. Where can I get software that will work correctly for my UV-5R.
Thanks
jeff
Sent from Mailhttps://go.microsoft.com/fwlink/?LinkId=550986 for Windows 10
________________________________
From: chirp_users-bounces@intrepid.danplanet.commailto:chirp_users-bounces@intrepid.danplanet.com <chirp_users-bounces@intrepid.danplanet.commailto:chirp_users-bounces@intrepid.danplanet.com> on behalf of chirp_users-request@intrepid.danplanet.commailto:chirp_users-request@intrepid.danplanet.com <chirp_users-request@intrepid.danplanet.commailto:chirp_users-request@intrepid.danplanet.com>
Sent: Sunday, June 9, 2019 3:00:03 PM
To: chirp_users@intrepid.danplanet.commailto:chirp_users@intrepid.danplanet.com
Subject: chirp_users Digest, Vol 126, Issue 7
Send chirp_users mailing list submissions to
        chirp_users@intrepid.danplanet.commailto:chirp_users@intrepid.danplanet.com
To subscribe or unsubscribe via the World Wide Web, visit
        http://intrepid.danplanet.com/mailman/listinfo/chirp_users
or, via email, send a message with subject or body 'help' to
        chirp_users-request@intrepid.danplanet.commailto:chirp_users-request@intrepid.danplanet.com
You can reach the person managing the list at
        chirp_users-owner@intrepid.danplanet.commailto:chirp_users-owner@intrepid.danplanet.com
When replying, please edit your Subject line so it is more specific
than "Re: Contents of chirp_users digest..."
Today's Topics:
1. Re: UV-5R and volume. (JD Morrow)
   2. Re: UV-5R and volume. (Nigel A. Gunn  G8IFF/W8IFF)
   3. Re: UV-5R and volume. (Nigel A. Gunn  G8IFF/W8IFF)
   4. Re: UV-5R and volume. (John Kemker)
   5. Adding 2m and 70cm repeaters (David)
   6. Re: Adding 2m and 70cm repeaters (Jim Unroe)
   7. Re: Adding 2m and 70cm repeaters (David)
   8. Re: Adding 2m and 70cm repeaters (Amnon Zohar)
   9. BF888 Settings tab items not saved (Barry Jackson)
  10. Yaesu ft-2dr programming cable (Rodney D. Myers)
----------------------------------------------------------------------
Message: 1
Date: Sat, 8 Jun 2019 16:16:55 -0400
From: "JD Morrow" <ngauge75@verizon.netmailto:ngauge75@verizon.net>
Subject: Re: [chirp_users] UV-5R and volume.
To: "Discussion of CHIRP" <chirp_users@intrepid.danplanet.commailto:chirp_users@intrepid.danplanet.com>
Message-ID: 62FFB68360F84463A8D8FFCE40A3C5D4@Laptop15
Content-Type: text/plain; format=flowed; charset="iso-8859-1";
        reply-type=original
All,
    Have been programming multiple (15+/-) UV-5's, for our group, for
several years. Never have had to mess with the volume. Versions of hardware
at the beginning was the worst. Cables and drivers, were a pain for a while
to, but not the radio controls.
73's JD
k2txv
-----Original Message-----
From: Jim Unroe
Sent: Saturday, June 8, 2019 1:22 PM
To: Discussion of CHIRP
Subject: Re: [chirp_users] UV-5R and volume.
On Sat, Jun 8, 2019 at 12:56 PM Don Goodrich <don.goodrich@cheerful.commailto:don.goodrich@cheerful.com>
wrote:
...
Certainly the computer volume control has no influence but since the data
is being communicated to/from the radio over the external radio audio
port, the radio volume control needs to be set midrange for the cable to
"hear" the outbound data.
Don Goodrich
don.goodrich@Cheerful.commailto:don.goodrich@Cheerful.com
AF7DG
The digital data is proviced on connections that have nothing to do
with the connections for the analog speaker audio or the analog
microphone audio. In addition to the audio wires (that aren't included
in the programming cable since they are not necessary to have for
programming) and the data wires, there is even a connection that
provides DC voltage (5V or 3.3V depending on the radio) to power
external devices.
http://www.miklor.com/COM/UV_Technical.php#spkrmic
Jim KC9HI
_______________________________________________
chirp_users mailing list
chirp_users@intrepid.danplanet.commailto:chirp_users@intrepid.danplanet.com
http://intrepid.danplanet.com/mailman/listinfo/chirp_users
This message was sent to John at ngauge75@verizon.netmailto:ngauge75@verizon.net
To unsubscribe, send an email to
chirp_users-unsubscribe@intrepid.danplanet.commailto:chirp_users-unsubscribe@intrepid.danplanet.com
------------------------------
Message: 2
Date: Sat, 8 Jun 2019 17:10:46 -0400 (EDT)
From: "Nigel A. Gunn  G8IFF/W8IFF" <nigel@ngunn.netmailto:nigel@ngunn.net>
Subject: Re: [chirp_users] UV-5R and volume.
To: Discussion of CHIRP <chirp_users@intrepid.danplanet.commailto:chirp_users@intrepid.danplanet.com>,   Don
        Goodrich <don.goodrich@cheerful.commailto:don.goodrich@cheerful.com>
Message-ID: <2139978547.224644.1560028246453@email.ionos.commailto:2139978547.224644.1560028246453@email.ionos.com>
Content-Type: text/plain; charset="utf-8"
Data uses the same connector. It doesn't go through the radio's audio chain. Audio is disabled when in program mode.
...
On 08 June 2019 at 12:48 Don Goodrich <don.goodrich@cheerful.commailto:don.goodrich@cheerful.com> wrote:
Certainly the computer volume control has no influence but since the data is being communicated to/from the radio over the external radio audio port, the radio volume control needs to be set midrange for the cable to "hear" the outbound data.

Don Goodrich
don.goodrich@Cheerful.com<mailto:don.goodrich@Cheerful.com>
AF7DG

  Sent: Saturday, June 08, 2019 at 7:12 AM
  From: "Nigel A. Gunn G8IFF/W8IFF" <nigel@ngunn.net<mailto:nigel@ngunn.net>>
  To: "Discussion of CHIRP" <chirp_users@intrepid.danplanet.com<mailto:chirp_users@intrepid.danplanet.com>>, "Dennis Wage" <dwage@dwage.com<mailto:dwage@dwage.com>>
  Subject: Re: [chirp_users] UV-5R and volume.

  True. The setting of the volume control has NOTHING to do with programming.

  If you have to wait several minutes between plugging in the radio and downloading with Chirp then your Windows installation is broken. It's not Chirp causing it.

      > > On 08 June 2019 at 06:54 Dennis Wage <dwage@dwage.com<mailto:dwage@dwage.com>> wrote:

...
      Pertaining to the UV-5R series of phones, I have seen numerous times that the volume needs to be turned up.

      Let's once and for all dispel or confirm this.

      I for one have found, and it makes total sense to me, that the volume has absolutely nothing to do with data being transferred to a computer with the data cable.

      Please confirm or deny.

      Thanks,

      Dennis M. Wage (W9BOQ)

      245 Corum Hill Road
      Castalian Springs, TN 37031
      (615) 310-4242  Cell
      (615) 562-5128 Home
      http://hammondb3organ.net/
      http://overdubs.net
      _______________________________________________
      chirp_users mailing list
      chirp_users@intrepid.danplanet.com<mailto:chirp_users@intrepid.danplanet.com>
      http://intrepid.danplanet.com/mailman/listinfo/chirp_users
      This message was sent to Nigel Gunn, W8IFF at nigel@ngunn.net<mailto:nigel@ngunn.net>
      To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com<mailto:chirp_users-unsubscribe@intrepid.danplanet.com>

  >

  Nigel A. Gunn, 1865 El Camino Drive, Xenia, OH 45385-1115, USA. tel +1 937 825 5032
  Amateur Radio G8IFF W8IFF and GMRS WRBV701, e-mail nigel@ngunn.net<mailto:nigel@ngunn.net> www http://www.ngunn.net

  _______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com<mailto:chirp_users@intrepid.danplanet.com> http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Don Goodrich at don.goodrich@cheerful.com<mailto:don.goodrich@cheerful.com> To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com<mailto:chirp_users-unsubscribe@intrepid.danplanet.com>

...
_______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.commailto:chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Nigel Gunn, W8IFF at nigel@ngunn.netmailto:nigel@ngunn.net To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.commailto:chirp_users-unsubscribe@intrepid.danplanet.com
Nigel A. Gunn, 1865 El Camino Drive, Xenia, OH 45385-1115, USA. tel +1 937 825 5032
Amateur Radio G8IFF W8IFF and GMRS WRBV701, e-mail nigel@ngunn.netmailto:nigel@ngunn.net www http://www.ngunn.net

Gary Craig

tags (0)

participants (1)