[chirp_users] How do I get extended error report from CHIRP?
How do I get extended debugging info from CHIRP.
I finally was able to test my USB cable. My cable is fine. My Wouxun KG-UV8E works fine on Wouxun's Windows software, but does not work on CHIRP, either on Windows 10 or Arch Linux.
I went back to the January 2018 daily build of CHIRP and used the module that is for the UV8D Plus kguv8dplus.py and it doesn't work.
How can I help with this?
Regards,
David N1EA
On Thu, Jan 17, 2019, 16:34 D.J.J. Ring, Jr. <n1ea@arrl.net wrote:
How do I get extended debugging info from CHIRP.
I finally was able to test my USB cable. My cable is fine. My Wouxun KG-UV8E works fine on Wouxun's Windows software, but does not work on CHIRP, either on Windows 10 or Arch Linux.
I went back to the January 2018 daily build of CHIRP and used the module that is for the UV8D Plus kguv8dplus.py and it doesn't work.
How can I help with this?
Regards,
David N1EA
It's in the DEBUG.LOG file stored somewhere on your hard drive (in the ~/chirp folder on Linux, no idea where in Windows)
On 17 January 2019 at 16:34 "D.J.J. Ring, Jr." n1ea@arrl.net wrote:
How do I get extended debugging info from CHIRP. I finally was able to test my USB cable. My cable is fine. My Wouxun KG-UV8E works fine on Wouxun's Windows software, but does not work on CHIRP, either on Windows 10 or Arch Linux. I went back to the January 2018 daily build of CHIRP and used the module that is for the UV8D Plus kguv8dplus.py and it doesn't work. How can I help with this? Regards, David N1EA _______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Nigel Gunn, W8IFF at nigel@ngunn.net To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com
Nigel A. Gunn, 1865 El Camino Drive, Xenia, OH 45385-1115, USA. tel +1 937 825 5032 Amateur Radio G8IFF W8IFF and GMRS WRBV701, e-mail nigel@ngunn.net www http://www.ngunn.net
The problem was STUPIDITY. I had thought I had seen that the Wouxun KG-UV8E was now supported by the KG-UV8plus module.
No it isn't.
Stupid me!
I load the kguv8dplus.py that Pavel had made for us to support the KG-UV8E (and T) versions - the triband versions. And CHIRP works!
So to get the full support including UV8E and UV8T you must use the module available here:
https://chirp.danplanet.com/issues/5481#change-16843
73 DR
participants (2)
-
D.J.J. Ring, Jr. -
Nigel A. Gunn G8IFF/W8IFF