[chirp_users] Baofeng Uv59 Prolific cable.
I am trying to make a home brew cable for chirp for the Yeasu ft2900.
I have an old prolific uv5r that's already been cut in half. Inside are a red, white and black wire.
If any one knows what the red, black and white wires in a prolific uv59 cable are for email me off list please.
The 2900 only needs data and ground, and I know which pins of the rj12 they go to.
Dennis M. Wage (W9BOQ)
245 Corum Hill Road Castalian Springs, TN 37031 (615) 310-4242 Cell (615) 562-5128 Home http://hammondb3organ.net http://overdubs.net
Do you have a com meter?
Jardy Dawson WA7JRD
Message sent from some electronic device that only the Manufacturer of said device really cares about.
On Nov 3, 2019, at 16:33, Dennis Wage dwage@dwage.com wrote:
I am trying to make a home brew cable for chirp for the Yeasu ft2900.
I have an old prolific uv5r that's already been cut in half. Inside are a red, white and black wire.
If any one knows what the red, black and white wires in a prolific uv59 cable are for email me off list please.
The 2900 only needs data and ground, and I know which pins of the rj12 they go to.
Dennis M. Wage (W9BOQ)
245 Corum Hill Road Castalian Springs, TN 37031 (615) 310-4242 Cell (615) 562-5128 Home http://hammondb3organ.net http://overdubs.net _______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Jardy at jardy72@yahoo.com To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com
If you mean a multi purpose volt meter? Yes.
Dennis M. Wage (W9BOQ)
245 Corum Hill Road Castalian Springs, TN 37031 (615) 310-4242 Cell (615) 562-5128 Home http://hammondb3organ.net http://overdubs.net
On Sun, Nov 3, 2019 at 6:38 PM Jardy via chirp_users < chirp_users@intrepid.danplanet.com> wrote:
Do you have a com meter?
Jardy Dawson WA7JRD
Message sent from some electronic device that only the Manufacturer of said device really cares about.
On Nov 3, 2019, at 16:33, Dennis Wage dwage@dwage.com wrote:
I am trying to make a home brew cable for chirp for the Yeasu ft2900.
I have an old prolific uv5r that's already been cut in half. Inside are a red, white and black wire.
If any one knows what the red, black and white wires in a prolific uv59 cable are for email me off list please.
The 2900 only needs data and ground, and I know which pins of the rj12 they go to.
Dennis M. Wage (W9BOQ)
245 Corum Hill Road Castalian Springs, TN 37031 (615) 310-4242 Cell (615) 562-5128 Home http://hammondb3organ.net http://overdubs.net _______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Jardy at jardy72@yahoo.com To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Dennis Wage at dwage@dwage.com To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com
You could check the leads with that.
Jardy Dawson WA7JRD
Message sent from some electronic device that only the Manufacturer of said device really cares about.
On Nov 3, 2019, at 17:40, Dennis Wage dwage@dwage.com wrote:
If you mean a multi purpose volt meter? Yes.
Dennis M. Wage (W9BOQ)
245 Corum Hill Road Castalian Springs, TN 37031 (615) 310-4242 Cell (615) 562-5128 Home http://hammondb3organ.net http://overdubs.net
On Sun, Nov 3, 2019 at 6:38 PM Jardy via chirp_users chirp_users@intrepid.danplanet.com wrote: Do you have a com meter?
Jardy Dawson WA7JRD
Message sent from some electronic device that only the Manufacturer of said device really cares about.
On Nov 3, 2019, at 16:33, Dennis Wage dwage@dwage.com wrote:
I am trying to make a home brew cable for chirp for the Yeasu ft2900.
I have an old prolific uv5r that's already been cut in half. Inside are a red, white and black wire.
If any one knows what the red, black and white wires in a prolific uv59 cable are for email me off list please.
The 2900 only needs data and ground, and I know which pins of the rj12 they go to.
Dennis M. Wage (W9BOQ)
245 Corum Hill Road Castalian Springs, TN 37031 (615) 310-4242 Cell (615) 562-5128 Home http://hammondb3organ.net http://overdubs.net _______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Jardy at jardy72@yahoo.com To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Dennis Wage at dwage@dwage.com To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Jardy at jardy72@yahoo.com To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com
That should be ‘ vom’ meter. Darn autocorrect.
Jardy Dawson WA7JRD
Message sent from some electronic device that only the Manufacturer of said device really cares about.
On Nov 3, 2019, at 22:30, Jardy via chirp_users chirp_users@intrepid.danplanet.com wrote:
Do you have a com meter?
Jardy Dawson WA7JRD
Message sent from some electronic device that only the Manufacturer of said device really cares about.
On Nov 3, 2019, at 16:33, Dennis Wage dwage@dwage.com wrote:
I am trying to make a home brew cable for chirp for the Yeasu ft2900.
I have an old prolific uv5r that's already been cut in half. Inside are a red, white and black wire.
If any one knows what the red, black and white wires in a prolific uv59 cable are for email me off list please.
The 2900 only needs data and ground, and I know which pins of the rj12 they go to.
Dennis M. Wage (W9BOQ)
245 Corum Hill Road Castalian Springs, TN 37031 (615) 310-4242 Cell (615) 562-5128 Home http://hammondb3organ.net http://overdubs.net _______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Jardy at jardy72@yahoo.com To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Jardy at jardy72@yahoo.com To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com
On Sun, Nov 3, 2019 at 7:33 PM Dennis Wage dwage@dwage.com wrote:
I am trying to make a home brew cable for chirp for the Yeasu ft2900.
I have an old prolific uv5r that's already been cut in half. Inside are a red, white and black wire.
If any one knows what the red, black and white wires in a prolific uv59 cable are for email me off list please.
The 2900 only needs data and ground, and I know which pins of the rj12 they go to.
Dennis M. Wage (W9BOQ)
Hi Dennis,
You probably won't need any of the existing wire. On many programming cables the USB end has a cover that can be easily separated and removed. That will give you access to 4 outputs of the USB UART.
5V TxD RxD Gnd
From there you will have to build an small bit of circuitry that
combines the 4 down to the 2 required for the radio.
RX/TX Gnd
After googling I see a circuit uses for (4) 2N7000 transistors and (4) 4.7k resistors to do the job. There may be others.
https://forums.qrz.com/index.php?threads/diy-make-your-own-programming-cable...
Good luck with the project and tell us how it works out.
Jim KC9HI
Thanks all. I just decided to buy one.
Dennis M. Wage (W9BOQ)
245 Corum Hill Road Castalian Springs, TN 37031 (615) 310-4242 Cell (615) 562-5128 Home http://hammondb3organ.net http://overdubs.net
On Mon, Nov 4, 2019 at 7:18 AM Jim Unroe rock.unroe@gmail.com wrote:
On Sun, Nov 3, 2019 at 7:33 PM Dennis Wage dwage@dwage.com wrote:
I am trying to make a home brew cable for chirp for the Yeasu ft2900.
I have an old prolific uv5r that's already been cut in half. Inside are
a red, white and black wire.
If any one knows what the red, black and white wires in a prolific uv59
cable are for email me off list please.
The 2900 only needs data and ground, and I know which pins of the rj12
they go to.
Dennis M. Wage (W9BOQ)
Hi Dennis,
You probably won't need any of the existing wire. On many programming cables the USB end has a cover that can be easily separated and removed. That will give you access to 4 outputs of the USB UART.
5V TxD RxD Gnd
From there you will have to build an small bit of circuitry that
combines the 4 down to the 2 required for the radio.
RX/TX Gnd
After googling I see a circuit uses for (4) 2N7000 transistors and (4) 4.7k resistors to do the job. There may be others.
https://forums.qrz.com/index.php?threads/diy-make-your-own-programming-cable...
Good luck with the project and tell us how it works out.
Jim KC9HI _______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Dennis Wage at dwage@dwage.com To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com
participants (3)
-
Dennis Wage -
Jardy -
Jim Unroe