[chirp_users] Password issues and CW/SSB cross-mode issue
*Password issues.* I used the "lost password" feature to change my password... but I still can't log in with the new password. Any ideas?
*Issue re Yaesu FT-857 and FT-857D.* I'm using a Yaesu FT-857D w/MARS mod, so I (successfully) use the FT-857 radio option.
On a few channels I programmed the radio for split mode -- i.e., transmit on CW on a carrier about 2 KHz lower than the suppressed LSB carrier for the channel I'm receiving. CHIRP handles the frequency split, but I can't specify the mode split. Any ideas?
David / K7DB
Chirp doesn't allow for split modes just frequencies. if you look at your manual page 75 Split Memory Mode. you will see how to program it.
On 3/27/2017 6:51 AM, David A. Behar wrote:
*Password issues.* I used the "lost password" feature to change my password... but I still can't log in with the new password. Any ideas?
*Issue re Yaesu FT-857 and FT-857D.* I'm using a Yaesu FT-857D w/MARS mod, so I (successfully) use the FT-857 radio option.
On a few channels I programmed the radio for split mode -- i.e., transmit on CW on a carrier about 2 KHz lower than the suppressed LSB carrier for the channel I'm receiving. CHIRP handles the frequency split, but I can't specify the mode split. Any ideas?
David / K7DB
____________________________________________________________ Warning: Don't Use Probiotics Before You See This Gundry MD http://thirdpartyoffers.juno.com/TGL3131/58d905e0c803c5df67c8st04duc
participants (2)
-
Brad -
David A. Behar