When plugging a headset into my UV-82 when I press the PTT button the radio changes to the B/UHF frequencies. Is there a way to prevent this. Thanks. This transmission may contain information that is privileged, confidential and/or exempt from disclosure under applicable law. If you are not the intended recipient, you are hereby notified that any disclosure, copying, distribution, or use of the information contained herein (including any reliance thereon) is STRICTLY PROHIBITED. If you received this transmission in error, please immediately contact the sender and destroy the material in its entirety, whether in electronic or hard copy form.
When using a single push to talk button type hand mic or headset, the radio goes to the bottom frequency automatic. This is factory set and can not be changed.
Todd Bloomingdale-KC9LOX
Tomah, WI
On Fri, Sep 2, 2016 at 4:16 PM, Don Lockman via chirp_users < chirp_users@intrepid.danplanet.com> wrote:
When plugging a headset into my UV-82 when I press the PTT button the radio changes to the B/UHF frequencies. Is there a way to prevent this.
Thanks.
This transmission may contain information that is privileged, confidential and/or exempt from disclosure under applicable law. If you are not the intended recipient, you are hereby notified that any disclosure, copying, distribution, or use of the information contained herein (including any reliance thereon) is STRICTLY PROHIBITED. If you received this transmission in error, please immediately contact the sender and destroy the material in its entirety, whether in electronic or hard copy form.
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to tbloomingdale@gmail.com at tbloomingdale@gmail.com To unsubscribe, send an email to chirp_users-unsubscribe@ intrepid.danplanet.com
The UV-82 uses a different headset from the standard Kenwood one because of its dual PTT buttons. Are you using the proper dual-PTT type designed for the UV-82 series? A standard Kenwood-type one for Kenwood radios, the Baofeng UV-5R series, Wouxuns, etc. does not work quite right in these radios.
Jim VE5EIS
From: chirp_users-bounces@intrepid.danplanet.com [mailto:chirp_users-bounces@intrepid.danplanet.com] On Behalf Of Don Lockman via chirp_users Sent: September-02-16 3:16 PM To: chirp_users@intrepid.danplanet.com Subject: [chirp_users] UV-82
When plugging a headset into my UV-82 when I press the PTT button the radio changes to the B/UHF frequencies. Is there a way to prevent this.
participants (3)
-
Don Lockman -
Jim MacKenzie -
Todd Bloomingdale