[chirp_users] Baofeng UV-82HP, cannot download from radio
Hi, I have a brand new UV-82HP. I connected it with the cable, and the cable loaded the USB Serial driver automatically. When I plug the radio in, the computer sees it on COM4. This is on Windows 8.1. I'm running the latest version of CHIRP, 20150814. The radio's firmware is US2S35. Anyway, when I try to download from the radio, I get this message: "Radio refused to send block 0x1ec0". The display on the radio seems to reset when I do this. I'm not sure what to try next.The cable is plugged in securely. Any ideas what to do? Thanks!
On Fri, Sep 25, 2015 at 6:55 PM, Elaine K. O. espamtrap@gmail.com wrote:
Hi, I have a brand new UV-82HP. I connected it with the cable, and the cable loaded the USB Serial driver automatically. When I plug the radio in, the computer sees it on COM4. This is on Windows 8.1. I'm running the latest version of CHIRP, 20150814. The radio's firmware is US2S35. Anyway, when I try to download from the radio, I get this message: "Radio refused to send block 0x1ec0". The display on the radio seems to reset when I do this. I'm not sure what to try next.The cable is plugged in securely. Any ideas what to do? Thanks!
Look in device manager to see what type of USB-to-TTL chip is in your programming cable. If it is a Prolific type chip, then look to see what device driver version is installed. If it is not v3.2.0.0 (it won't be unless you already downgraded it) it most likely is not compatible with this chip. You will have to downgrade the device driver to this version v3.2.0.0.
http://www.miklor.com/COM/UV_Drivers.php
Jim KC9HI
Use prolific driver 3.2.0.0.
Jardy Dawson WA7JRD Nobody really cares what device you are using, as long as YOU like it!
On Sep 25, 2015, at 15:55, Elaine K. O. espamtrap@gmail.com wrote:
Hi, I have a brand new UV-82HP. I connected it with the cable, and the cable loaded the USB Serial driver automatically. When I plug the radio in, the computer sees it on COM4. This is on Windows 8.1. I'm running the latest version of CHIRP, 20150814. The radio's firmware is US2S35. Anyway, when I try to download from the radio, I get this message: "Radio refused to send block 0x1ec0". The display on the radio seems to reset when I do this. I'm not sure what to try next.The cable is plugged in securely. Any ideas what to do? Thanks! _______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com
participants (3)
-
Elaine K. O. -
Jardy -
Jim Unroe