[chirp_users] CHIRP .csv Export Cross Mode Missing;
Hello,
I cannot figure out how to have the Cross Mode column included in my .csv export from CHIRP.
The Cross Mode column shows in CHIRP, but when I export a .csv it is missing;
In CHIRP;
The .csv header;
I use Filemaker for my main organization and radio setup, then export a .csv and import it into CHIRP to program my radios. This has worked fine, but now I need to program a couple of channels that use Cross Mode for tones.
Any idea how to include Cross Mode in the .csv?
Thanks in advance,
Craig
On Fri, Mar 19, 2021 at 8:50 PM Craig Hayes via chirp_users chirp_users@intrepid.danplanet.com wrote:
Hello,
I cannot figure out how to have the Cross Mode column included in my .csv export from CHIRP.
The Cross Mode column shows in CHIRP, but when I export a .csv it is missing;
In CHIRP;
The .csv header;
I use Filemaker for my main organization and radio setup, then export a .csv and import it into CHIRP to program my radios. This has worked fine, but now I need to program a couple of channels that use Cross Mode for tones.
Any idea how to include Cross Mode in the .csv?
Thanks in advance,
Craig
CSV files only support the following "Cross" mode: Tone->Tone
Just set...
Tone field: Cross rToneFreq field: TX CTCSS tone frequency cToneFreq field: RX CTCSS tone frequency
For any other Cross mode you will have to use the native CHIRP Radio Images (*.img) file.
Jim KC9HI
I think the csv export only includes fields that are common to all radios. As not all radios support cross mode, it isn't included. CSV only includes basic functions.
On 19/03/2021 20:32 Craig Hayes via chirp_users <chirp_users@intrepid.danplanet.com> wrote: Hello, I cannot figure out how to have the Cross Mode column included in my .csv export from CHIRP. The Cross Mode column shows in CHIRP, but when I export a .csv it is missing; In CHIRP; The .csv header; I use Filemaker for my main organization and radio setup, then export a .csv and import it into CHIRP to program my radios. This has worked fine, but now I need to program a couple of channels that use Cross Mode for tones. Any idea how to include Cross Mode in the .csv? Thanks in advance, Craig _______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Nigel Gunn, W8IFF at nigel@ngunn.net To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com
Nigel A. Gunn, ///shoulders.outwards.resolutions tel +1-937-971-0366 Amateur Radio G8IFF W8IFF and GMRS WRBV701, e-mail nigel@ngunn.net www http://www.ngunn.net
Ok this makes sense. I'll edit the individual channels.
I suppose I should get familiar with the "Import From File" dialog and how to only load specific channels.
Thanks for the help,
Craig
On Mar 19, 2021, at 6:16 PM, Nigel A. Gunn G8IFF/W8IFF nigel@ngunn.net wrote:
I think the csv export only includes fields that are common to all radios. As not all radios support cross mode, it isn't included. CSV only includes basic functions.
On 19/03/2021 20:32 Craig Hayes via chirp_users chirp_users@intrepid.danplanet.com wrote:
Hello,
I cannot figure out how to have the Cross Mode column included in my .csv export from CHIRP.
The Cross Mode column shows in CHIRP, but when I export a .csv it is missing;
In CHIRP;
<PastedGraphic-1.png>
The .csv header;
<PastedGraphic-3.png>
I use Filemaker for my main organization and radio setup, then export a .csv and import it into CHIRP to program my radios. This has worked fine, but now I need to program a couple of channels that use Cross Mode for tones.
Any idea how to include Cross Mode in the .csv?
Thanks in advance,
Craig
_______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Nigel Gunn, W8IFF at nigel@ngunn.net To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com
Nigel A. Gunn, ///shoulders.outwards.resolutions tel +1-937-971-0366 Amateur Radio G8IFF W8IFF and GMRS WRBV701, e-mail nigel@ngunn.net www http://www.ngunn.net
On Sat, Mar 20, 2021 at 12:30 PM Craig Hayes via chirp_users chirp_users@intrepid.danplanet.com wrote:
Ok this makes sense. I'll edit the individual channels.
I suppose I should get familiar with the "Import From File" dialog and how to only load specific channels.
Thanks for the help,
Craig
You can import from a native CHIRP Radio Images (*.img) file exactly the same way that you import from a CSV file. This way any saved Cross Mode settings will be preserved. The only difference is that you choose "*.img" instead of "*.csf" during the process of selecting which file to import.
Jim KC9HI
participants (3)
-
Craig Hayes -
Jim Unroe -
Nigel A. Gunn G8IFF/W8IFF