Re: [chirp_users] [CHIRP] #89: Not all frequencies showing (Dan Smith)
Actually, I failed to make it clear. All versions tested showed the 851.48750 as 851.48700 I will open these two things up.
On Mon, May 2, 2011 at 12:00 PM, <chirp_users-request@intrepid.danplanet.com
wrote:
Send chirp_users mailing list submissions to chirp_users@intrepid.danplanet.com
To subscribe or unsubscribe via the World Wide Web, visit http://intrepid.danplanet.com/mailman/listinfo/chirp_users or, via email, send a message with subject or body 'help' to chirp_users-request@intrepid.danplanet.com
You can reach the person managing the list at chirp_users-owner@intrepid.danplanet.com
When replying, please edit your Subject line so it is more specific than "Re: Contents of chirp_users digest..."
Today's Topics:
- Re: [CHIRP] #89: Not all frequencies showing (Dan Smith)
Message: 1 Date: Mon, 02 May 2011 10:49:43 -0700 From: Dan Smith dsmith@danplanet.com Subject: Re: [chirp_users] [CHIRP] #89: Not all frequencies showing To: Discussion of CHIRP chirp_users@intrepid.danplanet.com Message-ID: 4DBEEEB7.3030903@danplanet.com Content-Type: text/plain; charset=windows-1252; format=flowed
The bad news is (and I verified by rolling it back to see if this existed with the previous version) is when it reads memory channel 12, it is displaying a slight difference in the actual setting.
So the older build shows the proper frequency and the new one does not? That runs contrary to some of my testing, but I also have done some work on the functions that detect 12.5 and 6.25 step frequencies recently, so maybe something has changed.
If you could file another bug for this issue, I'd appreciate it. I'll take a look.
Another issue that is exhibited is, if a write the 800MHz frequency to the channel via the radio key pad, it is masked by VFO B as it isn't a supported channel. If I use the SW to write a 800MHz frequency then, even though it isn't supported by VFO B, it shows up when moving through the VFO B memory channels. Also, if I read the memory with the SW. Then write in a new frequency on a new memory channel, then write it to the radio, the previously masked frequencies stay masked. If a change is made to an already existing memory channel, it becomes unmasked to VFO B even if it is in that 800MHZ range.
Ah, okay, I know why that is. If you can file a bug for this one too (just to keep things organized) I'll get this resolved.
Thanks!
-- Dan Smith www.danplanet.com KK7DS
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users
End of chirp_users Digest, Vol 29, Issue 3
participants (2)
-
Dan -
Dan Smith