[chirp_users] Baofeng UV-5r
Hi! I am a new subscriber to this list. Can anyone tell me if there is a daily build that works with the uv-5r, firmware Ver. NSR3409 BFP3-25 that will show the tree power levels. I found builds that work with my radio but they just show the high and low power levels. Thanks Marv VE4KE
Marv, Is this a standard UV5R ? If so, the three power level software is not compatible. It only works with the 1, 4, 8W radios. If your radio is only capable of Lo (1w) and Hi (4w), using the tri-power software will make no difference in performance.
John
From: chirp_users-bounces@intrepid.danplanet.com [mailto:chirp_users-bounces@intrepid.danplanet.com] On Behalf Of Marven Konzelman Sent: Sunday, August 23, 2015 10:37 PM To: chirp_users@intrepid.danplanet.com Subject: [chirp_users] Baofeng UV-5r
Hi! I am a new subscriber to this list. Can anyone tell me if there is a daily build that works with the uv-5r, firmware Ver. NSR3409 BFP3-25 that will show the tree power levels. I found builds that work with my radio but they just show the high and low power levels. Thanks Marv VE4KE
Ok,no my radio is the 1,4,8w model and when I change it to low with the software that I am using it goes to 4w. However this not much of a problem as I can easily change it on the radio itself....Thanks John
From: John LaMartina Sent: Sunday, August 23, 2015 10:05 PM To: 'Discussion of CHIRP' Subject: Re: [chirp_users] Baofeng UV-5r
Marv, Is this a standard UV5R ? If so, the three power level software is not compatible. It only works with the 1, 4, 8W radios. If your radio is only capable of Lo (1w) and Hi (4w), using the tri-power software will make no difference in performance.
John
From: chirp_users-bounces@intrepid.danplanet.com [mailto:chirp_users-bounces@intrepid.danplanet.com] On Behalf Of Marven Konzelman Sent: Sunday, August 23, 2015 10:37 PM To: chirp_users@intrepid.danplanet.com Subject: [chirp_users] Baofeng UV-5r
Hi! I am a new subscriber to this list. Can anyone tell me if there is a daily build that works with the uv-5r, firmware Ver. NSR3409 BFP3-25 that will show the tree power levels. I found builds that work with my radio but they just show the high and low power levels. Thanks Marv VE4KE
-------------------------------------------------------------------------------- _______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com
It sounds like the radio model that you have is the BF-F8HP which is the last predecessor of the UV-5R and it has 3 power modes (1,4,8w). Did you choosing this radio from the list and then download data from your actual device?
On Mon, Aug 24, 2015 at 6:45 AM Marven Konzelman ve4ke@mymts.net wrote:
Ok,no my radio is the 1,4,8w model and when I change it to low with the software that I am using it goes to 4w. However this not much of a problem as I can easily change it on the radio itself....Thanks John
*From:* John LaMartina JohnLa@usa.net *Sent:* Sunday, August 23, 2015 10:05 PM *To:* 'Discussion of CHIRP' chirp_users@intrepid.danplanet.com *Subject:* Re: [chirp_users] Baofeng UV-5r
Marv, Is this a standard UV5R ? If so, the three power level software is not compatible. It only works with the 1, 4, 8W radios. If your radio is only capable of Lo (1w) and Hi (4w), using the tri-power software will make no difference in performance.
John
*From:* chirp_users-bounces@intrepid.danplanet.com [mailto: chirp_users-bounces@intrepid.danplanet.com] *On Behalf Of *Marven Konzelman *Sent:* Sunday, August 23, 2015 10:37 PM *To:* chirp_users@intrepid.danplanet.com *Subject:* [chirp_users] Baofeng UV-5r
Hi! I am a new subscriber to this list. Can anyone tell me if there is a daily build that works with the uv-5r, firmware Ver. NSR3409 BFP3-25 that will show the tree power levels. I found builds that work with my radio but they just show the high and low power levels. Thanks Marv VE4KE
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com _______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com
Marv,
Any recent daily build of CHIRP will work with your radio. Since it has 3 power levels, you would just choose the BF-F8HP as the model.
Jim KC9HI
On Sun, Aug 23, 2015 at 10:37 PM, Marven Konzelman ve4ke@mymts.net wrote:
Hi! I am a new subscriber to this list. Can anyone tell me if there is a daily build that works with the uv-5r, firmware Ver. NSR3409 BFP3-25 that will show the tree power levels. I found builds that work with my radio but they just show the high and low power levels. Thanks Marv VE4KE
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com
Ok,yes it works fine now that I selected the right model number.I was using uv-5r as the model before. Thanks for the help....Marv VE4KE
-----Original Message----- From: Jim Unroe Sent: Monday, August 24, 2015 4:30 AM To: Discussion of CHIRP Subject: Re: [chirp_users] Baofeng UV-5r
Marv,
Any recent daily build of CHIRP will work with your radio. Since it has 3 power levels, you would just choose the BF-F8HP as the model.
Jim KC9HI
On Sun, Aug 23, 2015 at 10:37 PM, Marven Konzelman ve4ke@mymts.net wrote:
Hi! I am a new subscriber to this list. Can anyone tell me if there is a daily build that works with the uv-5r, firmware Ver. NSR3409 BFP3-25 that will show the tree power levels. I found builds that work with my radio but they just show the high and low power levels. Thanks Marv VE4KE
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com
_______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com
participants (4)
-
Jim Unroe -
John LaMartina -
Marven Konzelman -
Yair Tzur