Re: [chirp_users] Can't hit repeater(s)?
Do they have pl tones and did you set them up as such? Jock KC6IIH
Sent from my Samsung Galaxy Tab JOCK KC6IIHJohn LaMartina ☀ JohnLa@usa.net wrote:Here's a guide that might be useful. http://www.miklor.com/uv5r/UserGuide. John ----- Sent via iPadX
On Nov 20, 2012, at 9:42 PM, Mike dunlapmichaell@gmail.com wrote:
I can not get my UV-5R to recognize a 2 meter repeater at all. I've set the offset and every known variable. Does anyone have a suggestion? It's a repeater in Dublin, VA at 146.67 and one in Perarisburg, VA at 147.135 . Thanks _______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users
_______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users
A friend and I recently bought two of the Baofang VG5R HT's and have had no proplems with them using Chirp and the VIP software provided by the MFG. Though the display doesn't show the offset on each channel, if you programmed it, it will display the +- and we hit all the local repeaters here. Keep at it, I am sure you will figure out your problem. And be sure you are using the latest build of Chirp, as they change everyday. Down load your radio before intering your information and you shouldn't have a problem. At least we didn't. Good luck! Once you get it set you will find it is a versitile little radio. I use if as a scanner whenever I walk the dog.
William R. (Rick) Cochran 529 Sheila Blvd. Prattville, Al 36066 334 202-1572 (Cell) wrcochran@yahoo.com AJ4ZZ, Amateur Extra Montgomery Amateur Radio Club Secretary Central Alabama Skywarn Net Controller Advanced Skywarn Storm Spotter
________________________________ From: Kc6iih Kc6iih@aol.com To: chirp_users@intrepid.danplanet.com Sent: Tuesday, November 20, 2012 10:13 PM Subject: Re: [chirp_users] Can't hit repeater(s)?
Do they have pl tones and did you set them up as such? Jock KC6IIH
Sent from my Samsung Galaxy Tab JOCK KC6IIH John LaMartina ☀ JohnLa@usa.net wrote: Here's a guide that might be useful. http://www.miklor.com/uv5r/UserGuide. John ----- Sent via iPadX
On Nov 20, 2012, at 9:42 PM, Mike dunlapmichaell@gmail.com wrote:
I can not get my UV-5R to recognize a 2 meter repeater at all. I've set the offset and every known variable. Does anyone have a suggestion? It's a repeater in Dublin, VA at 146.67 and one in Perarisburg, VA at 147.135 . Thanks _______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users
_______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users
_______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users
According to the repeaterbook.com website
The 146.670 MHz repeater in Shenandoah, has a PL of 114.8 Hz, input frequency offset -.600 MHz at 146.070. The 147.135 MHz repeater in Pearisburg has a PL of 100.0 Hz and input frequency offset +.600 MHz at 147.735. Someone should check me on this. AE7WZ
________________________________ From: Kc6iih Kc6iih@aol.com To: chirp_users@intrepid.danplanet.com Sent: Tuesday, November 20, 2012 8:13 PM Subject: Re: [chirp_users] Can't hit repeater(s)?
Do they have pl tones and did you set them up as such? Jock KC6IIH
Sent from my Samsung Galaxy Tab JOCK KC6IIH John LaMartina ☀ JohnLa@usa.net wrote: Here's a guide that might be useful. http://www.miklor.com/uv5r/UserGuide. John ----- Sent via iPadX
On Nov 20, 2012, at 9:42 PM, Mike dunlapmichaell@gmail.com wrote:
I can not get my UV-5R to recognize a 2 meter repeater at all. I've set the offset and every known variable. Does anyone have a suggestion? It's a repeater in Dublin, VA at 146.67 and one in Perarisburg, VA at 147.135 . Thanks _______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users
_______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users
_______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users
participants (3)
-
Allen Bradley -
Kc6iih -
William Cochran