Hi,

I've had that problem when I accidentally try to upload an image from an older uv5r onto a newer one.

Did you start with an image directly downloaded from the radio you are trying to upload to?

Tim KC1AJJ On May 2, 2016 9:28 PM, "Steve via chirp_users" < chirp_users@intrepid.danplanet.com> wrote:

My new UV-5R, when downloaded from the radio, will not show anything under the settings tab.

I am getting this error message:

The upload was stopped because the firmware version of the image (N5R2407BFB297 ) does not match that of the radio ( Ver BFB229 ).

Any ideas??

Thanks, Steve

Sent from Mail https://go.microsoft.com/fwlink/?LinkId=550986 for Windows 10

https://www.avast.com/sig-email?utm_medium=email&utm_source=link&utm_campaign=sig-email&utm_content=emailclient&utm_term=icon Virus-free. www.avast.com https://www.avast.com/sig-email?utm_medium=email&utm_source=link&utm_campaign=sig-email&utm_content=emailclient&utm_term=link

---

chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Tim KC1AJJ at tim.miranda@gmail.com To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com

On Mon, May 2, 2016 at 9:27 PM, Steve via chirp_users chirp_users@intrepid.danplanet.com wrote:

My new UV-5R, when downloaded from the radio, will not show anything under the settings tab.

I am getting this error message:

The upload was stopped because the firmware version of the image (N5R2407BFB297 ) does not match that of the radio ( Ver BFB229 ).

Any ideas??

Thanks, Steve

Steve,

Your radio has a setting in it that is our-of-range for one of the menus. This usually happens when there is one or more corrupted bytes in the radio's memory. Examining the debug.log file may give a clue which setting is out-of-range.

Once you have saved the original image to a file as a backup, a possible solution is to reset the radio and download from it again. Hopefully the settings menus will then show and you can import the channels from your backup image file into your radio.

You must not directly upload an image save from one radio into a radio with a different firmware version. They are different so CHIRP is correctly stopping the upload.

Jim KC9HI