Really like the new look of CHIRP! I still cannot use CHIRP on Windows to program my AnyTone 778UV, but other than that it works just fine. 73 KI4RO.
On Wed, Jan 4, 2023 at 12:13 AM John KI4RO johnki4ro@gmail.com wrote:
Really like the new look of CHIRP! I still cannot use CHIRP on Windows to program my AnyTone 778UV, but other than that it works just fine.
The AnyTone AT-778UV is a supported radio model. Do you not have Windows 10 or newer?
Jim KC9HI
Please tell me there is some way to change the font used by Chirp Next? The default font hurts my eyes!
On Wed, Jan 4, 2023 at 6:21 AM Jim Unroe rock.unroe@gmail.com wrote:
On Wed, Jan 4, 2023 at 12:13 AM John KI4RO johnki4ro@gmail.com wrote:
Really like the new look of CHIRP! I still cannot use CHIRP on Windows to program my AnyTone 778UV, but
other than that it works just fine.
The AnyTone AT-778UV is a supported radio model. Do you not have Windows 10 or newer?
Jim KC9HI _______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to babj615@gmail.com at babj615@gmail.com To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com To report this email as off-topic, please email chirp_users-owner@intrepid.danplanet.com Searchable archive: https://www.mail-archive.com/chirp_users@intrepid.danplanet.com
Please tell me there is some way to change the font used by Chirp Next? The default font hurts my eyes!
Not currently, but please check tomorrow's build. The short story is, being a developer, I like tabulated and structured data to appear in fixed-width (i.e. typewriter) font so that everything lines up. I'm starting to gather the impression that my preference is not shared by many other people in the community :)
So tomorrow it will change to the system-default variable-width font. Please let me know if that addresses your concern.
If there are users here who prefer the fixed-width font the way it is today, speak up and I'll make a way for you to choose which one is used. If I'm the only one, then I won't bother :)
--Dan
I'll add my +1 for fixed pitch. Definitely nice to have things line up. Variable pitch could get messy.
Martin. KD6YAM
On Wed, Jan 4, 2023 at 5:27 PM Dan Smith via chirp_users < chirp_users@intrepid.danplanet.com> wrote:
Please tell me there is some way to change the font used by Chirp Next?
The default font hurts my eyes!
Not currently, but please check tomorrow's build. The short story is, being a developer, I like tabulated and structured data to appear in fixed-width (i.e. typewriter) font so that everything lines up. I'm starting to gather the impression that my preference is not shared by many other people in the community :)
So tomorrow it will change to the system-default variable-width font. Please let me know if that addresses your concern.
If there are users here who prefer the fixed-width font the way it is today, speak up and I'll make a way for you to choose which one is used. If I'm the only one, then I won't bother :)
--Dan _______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Martin Cooper at mfncooper@gmail.com To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com To report this email as off-topic, please email chirp_users-owner@intrepid.danplanet.com Searchable archive: https://www.mail-archive.com/chirp_users@intrepid.danplanet.com
I MUCH prefer fixed width fonts.
My personal preference would be to default to a fixed width font, but allow the user to choose something different, if desired.
On Wed, Jan 4, 2023, 6:26 PM Dan Smith via chirp_users < chirp_users@intrepid.danplanet.com> wrote:
Please tell me there is some way to change the font used by Chirp Next?
The default font hurts my eyes!
Not currently, but please check tomorrow's build. The short story is, being a developer, I like tabulated and structured data to appear in fixed-width (i.e. typewriter) font so that everything lines up. I'm starting to gather the impression that my preference is not shared by many other people in the community :)
So tomorrow it will change to the system-default variable-width font. Please let me know if that addresses your concern.
If there are users here who prefer the fixed-width font the way it is today, speak up and I'll make a way for you to choose which one is used. If I'm the only one, then I won't bother :)
--Dan _______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to UtahDave at boucha@gmail.com To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com To report this email as off-topic, please email chirp_users-owner@intrepid.danplanet.com Searchable archive: https://www.mail-archive.com/chirp_users@intrepid.danplanet.com
I MUCH prefer fixed width fonts.
My personal preference would be to default to a fixed width font, but allow the user to choose something different, if desired.
Okay, well, glad some other people here like the fixed-width :)
I'll work on making it an option. For tomorrow, it'll be variable width only, but sometime later, it'll be optional.
--Dan
Hi there. I pulled the latest build from git this evening, and I still cannot run chirp from /usr/local/bin. Can someone please let me know what I may be doing wrong? Below is a screenshot from my last attempt. Thanks much, and looking forward to testing further developments.
Guy Ke8Jyp
Searching for pyserial==3.5 Best match: pyserial 3.5 Adding pyserial 3.5 to easy-install.pth file Installing pyserial-miniterm script to /usr/local/bin Installing pyserial-ports script to /usr/local/bin
Using /usr/lib/python3/dist-packages Searching for future==0.18.2 Best match: future 0.18.2 Adding future 0.18.2 to easy-install.pth file Installing futurize script to /usr/local/bin Installing pasteurize script to /usr/local/bin
Using /usr/lib/python3/dist-packages Finished processing dependencies for chirp===py3dev guyster@guyster-desktop:~/chirp$ cd /usr/local/bin guyster@guyster-desktop:/usr/local/bin$ ./chirp Traceback (most recent call last): File "/usr/local/bin/./chirp", line 33, in <module> sys.exit(load_entry_point('chirp===py3dev', 'console_scripts', 'chirp')()) File "/usr/local/bin/./chirp", line 25, in importlib_load_entry_point return next(matches).load() StopIteration guyster@guyster-desktop:/usr/local/bin$
Hi Guy, Did you do the full install? I made the mistake of trying the daily build without first actually installing Chirp. Maybe I'm wrong, but I think these daily things are not a full install. After all that, I did the full install, then the daily build, and the chirpw file ran, but I didn't use flatpak. And flatpak does not work with a screenreader, at least where I've tried it, so I just uninstalled my failed attempts. Glenn ----- Original Message ----- From: "Guy Schlosser" guyster@bex.net To: "Discussion of CHIRP" chirp_users@intrepid.danplanet.com; "David Boucha" boucha@gmail.com; "Dan Smith" dsmith@danplanet.com Sent: Thursday, January 05, 2023 8:24 PM Subject: [chirp_users] still can't run chirp from command line
Hi there. I pulled the latest build from git this evening, and I still cannot run chirp from /usr/local/bin. Can someone please let me know what I may be doing wrong? Below is a screenshot from my last attempt. Thanks much, and looking forward to testing further developments.
Guy Ke8Jyp
Searching for pyserial==3.5 Best match: pyserial 3.5 Adding pyserial 3.5 to easy-install.pth file Installing pyserial-miniterm script to /usr/local/bin Installing pyserial-ports script to /usr/local/bin
Using /usr/lib/python3/dist-packages Searching for future==0.18.2 Best match: future 0.18.2 Adding future 0.18.2 to easy-install.pth file Installing futurize script to /usr/local/bin Installing pasteurize script to /usr/local/bin
Using /usr/lib/python3/dist-packages Finished processing dependencies for chirp===py3dev guyster@guyster-desktop:~/chirp$ cd /usr/local/bin guyster@guyster-desktop:/usr/local/bin$ ./chirp Traceback (most recent call last): File "/usr/local/bin/./chirp", line 33, in <module> sys.exit(load_entry_point('chirp===py3dev', 'console_scripts', 'chirp')()) File "/usr/local/bin/./chirp", line 25, in importlib_load_entry_point return next(matches).load() StopIteration guyster@guyster-desktop:/usr/local/bin$
_______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to K0LNY at glenn@ervin.email To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com To report this email as off-topic, please email chirp_users-owner@intrepid.danplanet.com Searchable archive: https://www.mail-archive.com/chirp_users@intrepid.danplanet.com
On 2023-01-04 16:36, Dan Smith via chirp_users wrote:
snip
If there are users here who prefer the fixed-width font the way it is today, speak up and I'll make a way for you to choose which one is used. If I'm the only one, then I won't bother :)
--Dan
Fixed +1 <g>
73, thanks for all the work on this gem.
John
On 05/01/2023 00:36, Dan Smith via chirp_users wrote:
Please tell me there is some way to change the font used by Chirp Next? The default font hurts my eyes!
Not currently, but please check tomorrow's build. The short story is, being a developer, I like tabulated and structured data to appear in fixed-width (i.e. typewriter) font so that everything lines up. I'm starting to gather the impression that my preference is not shared by many other people in the community :)
So tomorrow it will change to the system-default variable-width font. Please let me know if that addresses your concern.
If there are users here who prefer the fixed-width font the way it is today, speak up and I'll make a way for you to choose which one is used. If I'm the only one, then I won't bother :)
--Dan _______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Barry at zen25000@zen.co.uk To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com To report this email as off-topic, please email chirp_users-owner@intrepid.danplanet.com Searchable archive: https://www.mail-archive.com/chirp_users@intrepid.danplanet.com
Please keep fixed width!
Sometimes in the personalize settings you can change the global fonts of most adds. Give that a try.
On Wed, Jan 4, 2023, 5:26 PM babj615 babj615@gmail.com wrote:
Please tell me there is some way to change the font used by Chirp Next? The default font hurts my eyes!
On Wed, Jan 4, 2023 at 6:21 AM Jim Unroe rock.unroe@gmail.com wrote:
On Wed, Jan 4, 2023 at 12:13 AM John KI4RO johnki4ro@gmail.com wrote:
Really like the new look of CHIRP! I still cannot use CHIRP on Windows to program my AnyTone 778UV, but
other than that it works just fine.
The AnyTone AT-778UV is a supported radio model. Do you not have Windows 10 or newer?
Jim KC9HI _______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to babj615@gmail.com at babj615@gmail.com To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com To report this email as off-topic, please email chirp_users-owner@intrepid.danplanet.com Searchable archive: https://www.mail-archive.com/chirp_users@intrepid.danplanet.com
-- *///*Andy
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Dan at dgberry@gmail.com To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com To report this email as off-topic, please email chirp_users-owner@intrepid.danplanet.com Searchable archive: https://www.mail-archive.com/chirp_users@intrepid.danplanet.com
I'd like to be able to change the font... So the fonts make a sound.
----- Original Message ----- From: Dan Berry To: Discussion of CHIRP Sent: Wednesday, January 04, 2023 6:44 PM Subject: Re: [chirp_users] Nice!
Sometimes in the personalize settings you can change the global fonts of most adds. Give that a try.
On Wed, Jan 4, 2023, 5:26 PM babj615 babj615@gmail.com wrote:
Please tell me there is some way to change the font used by Chirp Next? The default font hurts my eyes!
On Wed, Jan 4, 2023 at 6:21 AM Jim Unroe rock.unroe@gmail.com wrote:
On Wed, Jan 4, 2023 at 12:13 AM John KI4RO johnki4ro@gmail.com wrote: > > Really like the new look of CHIRP! > I still cannot use CHIRP on Windows to program my AnyTone 778UV, but other than that it works just fine.
The AnyTone AT-778UV is a supported radio model. Do you not have Windows 10 or newer?
Jim KC9HI _______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to babj615@gmail.com at babj615@gmail.com To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com To report this email as off-topic, please email chirp_users-owner@intrepid.danplanet.com Searchable archive: https://www.mail-archive.com/chirp_users@intrepid.danplanet.com
--
///Andy
_______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Dan at dgberry@gmail.com To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com To report this email as off-topic, please email chirp_users-owner@intrepid.danplanet.com Searchable archive: https://www.mail-archive.com/chirp_users@intrepid.danplanet.com
--------------------------------------------------------------------------------
_______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to K0LNY at glenn@ervin.email To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com To report this email as off-topic, please email chirp_users-owner@intrepid.danplanet.com Searchable archive: https://www.mail-archive.com/chirp_users@intrepid.danplanet.com
I always prefer fixed width fonts for tabulated data Tony G7TXU
On Thu, 5 Jan 2023 at 01:28, Dan Berry dgberry@gmail.com wrote:
Sometimes in the personalize settings you can change the global fonts of most adds. Give that a try.
On Wed, Jan 4, 2023, 5:26 PM babj615 babj615@gmail.com wrote:
Please tell me there is some way to change the font used by Chirp Next? The default font hurts my eyes!
On Wed, Jan 4, 2023 at 6:21 AM Jim Unroe rock.unroe@gmail.com wrote:
On Wed, Jan 4, 2023 at 12:13 AM John KI4RO johnki4ro@gmail.com wrote:
Really like the new look of CHIRP! I still cannot use CHIRP on Windows to program my AnyTone 778UV, but
other than that it works just fine.
The AnyTone AT-778UV is a supported radio model. Do you not have Windows 10 or newer?
Jim KC9HI _______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to babj615@gmail.com at babj615@gmail.com To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com To report this email as off-topic, please email chirp_users-owner@intrepid.danplanet.com Searchable archive: https://www.mail-archive.com/chirp_users@intrepid.danplanet.com
-- *///*Andy
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Dan at dgberry@gmail.com To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com To report this email as off-topic, please email chirp_users-owner@intrepid.danplanet.com Searchable archive: https://www.mail-archive.com/chirp_users@intrepid.danplanet.com
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Tony Ling at tonyg7txu@gmail.com To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com To report this email as off-topic, please email chirp_users-owner@intrepid.danplanet.com Searchable archive: https://www.mail-archive.com/chirp_users@intrepid.danplanet.com
Same here...
On Wed, Jan 4, 2023 at 8:33 PM Tony Ling tonyg7txu@gmail.com wrote:
I always prefer fixed width fonts for tabulated data Tony G7TXU
On Thu, 5 Jan 2023 at 01:28, Dan Berry dgberry@gmail.com wrote:
Sometimes in the personalize settings you can change the global fonts of most adds. Give that a try.
On Wed, Jan 4, 2023, 5:26 PM babj615 babj615@gmail.com wrote:
Please tell me there is some way to change the font used by Chirp Next? The default font hurts my eyes!
On Wed, Jan 4, 2023 at 6:21 AM Jim Unroe rock.unroe@gmail.com wrote:
On Wed, Jan 4, 2023 at 12:13 AM John KI4RO johnki4ro@gmail.com wrote:
Really like the new look of CHIRP! I still cannot use CHIRP on Windows to program my AnyTone 778UV, but other than that it works just fine.
The AnyTone AT-778UV is a supported radio model. Do you not have Windows 10 or newer?
Jim KC9HI _______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to babj615@gmail.com at babj615@gmail.com To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com To report this email as off-topic, please email chirp_users-owner@intrepid.danplanet.com Searchable archive: https://www.mail-archive.com/chirp_users@intrepid.danplanet.com
-- ///Andy
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Dan at dgberry@gmail.com To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com To report this email as off-topic, please email chirp_users-owner@intrepid.danplanet.com Searchable archive: https://www.mail-archive.com/chirp_users@intrepid.danplanet.com
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Tony Ling at tonyg7txu@gmail.com To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com To report this email as off-topic, please email chirp_users-owner@intrepid.danplanet.com Searchable archive: https://www.mail-archive.com/chirp_users@intrepid.danplanet.com
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Chuck Hast at kp4djt@gmail.com To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com To report this email as off-topic, please email chirp_users-owner@intrepid.danplanet.com Searchable archive: https://www.mail-archive.com/chirp_users@intrepid.danplanet.com
I don't know which language you are programming in, but I think most languages have a call to use the system font. Then everyone can have what ever their default is.
If I remember correctly, java has it, and C++. Source forge might have some helps.
On Wed, Jan 4, 2023, 7:33 PM Tony Ling tonyg7txu@gmail.com wrote:
I always prefer fixed width fonts for tabulated data Tony G7TXU
On Thu, 5 Jan 2023 at 01:28, Dan Berry dgberry@gmail.com wrote:
Sometimes in the personalize settings you can change the global fonts of most adds. Give that a try.
On Wed, Jan 4, 2023, 5:26 PM babj615 babj615@gmail.com wrote:
Please tell me there is some way to change the font used by Chirp Next? The default font hurts my eyes!
On Wed, Jan 4, 2023 at 6:21 AM Jim Unroe rock.unroe@gmail.com wrote:
On Wed, Jan 4, 2023 at 12:13 AM John KI4RO johnki4ro@gmail.com wrote:
Really like the new look of CHIRP! I still cannot use CHIRP on Windows to program my AnyTone 778UV, but
other than that it works just fine.
The AnyTone AT-778UV is a supported radio model. Do you not have Windows 10 or newer?
Jim KC9HI _______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to babj615@gmail.com at babj615@gmail.com To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com To report this email as off-topic, please email chirp_users-owner@intrepid.danplanet.com Searchable archive: https://www.mail-archive.com/chirp_users@intrepid.danplanet.com
-- *///*Andy
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Dan at dgberry@gmail.com To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com To report this email as off-topic, please email chirp_users-owner@intrepid.danplanet.com Searchable archive: https://www.mail-archive.com/chirp_users@intrepid.danplanet.com
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Tony Ling at tonyg7txu@gmail.com To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com To report this email as off-topic, please email chirp_users-owner@intrepid.danplanet.com Searchable archive: https://www.mail-archive.com/chirp_users@intrepid.danplanet.com
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Dan at dgberry@gmail.com To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com To report this email as off-topic, please email chirp_users-owner@intrepid.danplanet.com Searchable archive: https://www.mail-archive.com/chirp_users@intrepid.danplanet.com
Stack overflow, W3code, code academy. To name a few online helps.
On Wed, Jan 4, 2023, 7:46 PM Dan Berry dgberry@gmail.com wrote:
I don't know which language you are programming in, but I think most languages have a call to use the system font. Then everyone can have what ever their default is.
If I remember correctly, java has it, and C++. Source forge might have some helps.
On Wed, Jan 4, 2023, 7:33 PM Tony Ling tonyg7txu@gmail.com wrote:
I always prefer fixed width fonts for tabulated data Tony G7TXU
On Thu, 5 Jan 2023 at 01:28, Dan Berry dgberry@gmail.com wrote:
Sometimes in the personalize settings you can change the global fonts of most adds. Give that a try.
On Wed, Jan 4, 2023, 5:26 PM babj615 babj615@gmail.com wrote:
Please tell me there is some way to change the font used by Chirp Next? The default font hurts my eyes!
On Wed, Jan 4, 2023 at 6:21 AM Jim Unroe rock.unroe@gmail.com wrote:
On Wed, Jan 4, 2023 at 12:13 AM John KI4RO johnki4ro@gmail.com wrote:
Really like the new look of CHIRP! I still cannot use CHIRP on Windows to program my AnyTone 778UV, but
other than that it works just fine.
The AnyTone AT-778UV is a supported radio model. Do you not have Windows 10 or newer?
Jim KC9HI _______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to babj615@gmail.com at babj615@gmail.com To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com To report this email as off-topic, please email chirp_users-owner@intrepid.danplanet.com Searchable archive: https://www.mail-archive.com/chirp_users@intrepid.danplanet.com
-- *///*Andy
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Dan at dgberry@gmail.com To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com To report this email as off-topic, please email chirp_users-owner@intrepid.danplanet.com Searchable archive: https://www.mail-archive.com/chirp_users@intrepid.danplanet.com
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Tony Ling at tonyg7txu@gmail.com To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com To report this email as off-topic, please email chirp_users-owner@intrepid.danplanet.com Searchable archive: https://www.mail-archive.com/chirp_users@intrepid.danplanet.com
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Dan at dgberry@gmail.com To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com To report this email as off-topic, please email chirp_users-owner@intrepid.danplanet.com Searchable archive: https://www.mail-archive.com/chirp_users@intrepid.danplanet.com
participants (15)
-
babj615 -
Barry Jackson -
benton＠siletzbay.com -
Chuck Hast -
Dan Berry -
Dan Smith -
David Boucha -
Guy Schlosser -
Jim Unroe -
John KI4RO -
K0LNY_Glenn -
Martin Cooper -
Phil -
Tony Ling -
VA7OTC John D Erskine