Re: [chirp_users] UV-B6 : how to get into programming mode
You need the 2.3.0.0 Driver to work right and no there is not a key code sequence to program it with. Just hook up the cable to it. plug it into the usb. Load the software and tell it to read from the radio on the comport you have set for the cable. Then program it and save it then write back to the radio. It will take care of it all automatically.
Brad NK8J
-----Original Message----- From: chirp_users-bounces@intrepid.danplanet.com [mailto:chirp_users-bounces@intrepid.danplanet.com] On Behalf Of eMyListsDDg Sent: Friday, October 04, 2013 2:50 PM To: chirp_users@intrepid.danplanet.com Subject: [chirp_users] UV-B6 : howto get into programming mode
Hello ,
totally new to this world, so hang with me a bit.
i purchased the UV-B6 the other day. never could get the PL-2303 driver to work on Win7. the cd that came with the cable didn't only had drivers for XP & Vista. tried Vista driver too. downloaded 1.1.19 driver, that didn't work under Win7 either.
so i fired up an old XP notebook, and poof, the XP PL driver installed and is working and i have Chirp installed on that machine too.
i'm trying to initiate a download so i can create my first template. didn't even know to do that if i hadn't gone to this site: http://www.miklor.com/UVB5/UVB5-CHIRP.php
of course now the Chirp sw is returning the radio didn't ack programming mode. my eyes just don't see anywhere in the manual that came with the UV-B6 what key-combo? needed to put this unit in programming mode.
is there like a wiki for "uv-b6 dummies" or something that would help me get started?
tia
Hello Brad,
that worked. thanks!!
You need the 2.3.0.0 Driver to work right and no there is not a key code sequence to program it with. Just hook up the cable to it. plug it into the usb. Load the software and tell it to read from the radio on the comport you have set for the cable. Then program it and save it then write back to the radio. It will take care of it all automatically.
Brad NK8J
-----Original Message----- From: chirp_users-bounces@intrepid.danplanet.com [mailto:chirp_users-bounces@intrepid.danplanet.com] On Behalf Of eMyListsDDg Sent: Friday, October 04, 2013 2:50 PM To: chirp_users@intrepid.danplanet.com Subject: [chirp_users] UV-B6 : howto get into programming mode
Hello ,
totally new to this world, so hang with me a bit.
i purchased the UV-B6 the other day. never could get the PL-2303 driver to work on Win7. the cd that came with the cable didn't only had drivers for XP & Vista. tried Vista driver too. downloaded 1.1.19 driver, that didn't work under Win7 either.
so i fired up an old XP notebook, and poof, the XP PL driver installed and is working and i have Chirp installed on that machine too.
i'm trying to initiate a download so i can create my first template. didn't even know to do that if i hadn't gone to this site: http://www.miklor.com/UVB5/UVB5-CHIRP.php
of course now the Chirp sw is returning the radio didn't ack programming mode. my eyes just don't see anywhere in the manual that came with the UV-B6 what key-combo? needed to put this unit in programming mode.
is there like a wiki for "uv-b6 dummies" or something that would help me get started?
tia
participants (2)
-
Brad NK8J -
eMyListsDDg