[chirp_users] Baofeng UV-82
This is pretty sad and maybe a little off topic but ....
How do you get these things to go into "Name" mode?
I picked up a pair of these to have on hand when my YL and I go on a trip and I CANNOT get them to go into anything but VFO mode. I have them set to "Name" mode in the chirp settings and have tried changing them to Name mode in the menu of the radio and they will not change to anything but VFO.
What am I missing? Please enlighten me before I return them.
with the radio turned off.. hold down the menu button and turn the radio on. sounds like you are in VFO mode and need to turn to memory mode. that is how you switch between the 2 on the 82
Todd Bloomingdale-KC9LOX
Tomah, WI
On Wed, Apr 6, 2016 at 7:10 AM, Tim Billingsley kd5ckp@gmail.com wrote:
On Wed, Apr 6, 2016 at 8:10 AM, Tim Billingsley kd5ckp@gmail.com wrote:
To toggle between VFO (frequency) mode and MR (channel) mode...
1 Turn the radio off 2 Press and hold the [MENU] button 3 Turn the radio on 4 After the radio fully boots, let off the [MENU] button
Jim KC9HI
On Wed, Apr 6, 2016 at 8:10 AM, Tim Billingsley kd5ckp@gmail.com wrote:
Also if when programming with CHIRP you access the Settings -> Work Mode Settings menu, you can set VFO/MR Mode to Channel and after the upload completes, the radio will be in "channel" mode.
Jim KC9HI
Menu 21&22 for a or b name or freq. On Apr 6, 2016 7:12 AM, "Tim Billingsley" kd5ckp@gmail.com wrote:
Name must be programmed with software like older radios On Apr 6, 2016 7:12 AM, "Tim Billingsley" kd5ckp@gmail.com wrote:
Another hint - I seldom have need to dual transmit, so in CHIRP I set band A to NAME and band B to FREQUENCY. Then when using the radio I tune both bands to the same channel (the channel number is displayed in small numbers at the extreme right of the display at all times when you are in channel mode). That way I can see both the name and the frequency of the channel I am on and don't have to worry whether I am pressing the upper or lower transmit key as both bands are set to the same channel. Not quite as good as a synchronized display but a good work around.
On Wed, Apr 6, 2016 at 12:36 PM, Robert Taylor vawing@gmail.com wrote:
That's a great idea. Thanks for sharing it.
- Trevor
Tim meant to say Channel mode. He was "stuck" in Frequency mode and didn't know the "secret handshake".
Jim KC9HI
On Wed, Apr 6, 2016 at 12:37 PM, David weather@lightingunlimited.com wrote:
What is name mode?
On Apr 6, 2016 12:26, "Jim Unroe" rock.unroe@gmail.com wrote:
Actually Jim they are listed in the menu as Name, Channel, and Frequency
participants (7)
-
David
-
Jim Unroe
-
Lee Houde
-
Robert Taylor
-
Tim Billingsley
-
Todd Bloomingdale
-
Trevor Holyoak