Dump the Mac book. I use windows 10 and have no problems.

Jock KC6IIH Sent from my Samsung Galaxy Tab®|PRO

-------- Original message -------- From: David Dixon yattonbristol@btinternet.com Date:05/29/2017 10:12 PM (GMT-08:00) To: Discussion of CHIRP chirp_users@intrepid.danplanet.com Subject: Re: [chirp_users] BaoFeng BF-F9V2+ issues downloading/uploading to MacBook Pro running 10.12

On 30 May 2017, at 03:22, Jeff Davis kf5hqe.jeff@gmail.com wrote:

Hi Folks,

I’m running a MacBook Pro using OS 10.12.5. I’ve received three different radios along with USB to BaoFang connection cables.

When I open Chrip, the Mac OS systems report shows the USB port and the device so the Mac Sees it.

But when I run the Radio/Download from Radio command, I get the <Screen Shot 2017-05-29 at 9.18.23 PM.png>

Any ideas? I’ve tried all three cables and tried it with this radio as well as two UV-5R’s, same results.

Thank you in advance.

Jeff Davis KF5HQE

_______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to David at yattonbristol@btinternet.com To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com

Hello Jeff

I am using a Mac mini with Chirp with a few radio one is the UV-5R first thing I plug in the USB cable ( USB -02) and radio setting it to VFO mode volume almost full then click on chirp program after clicking on Radio Button on top menu then Download from radio up comes a box then I set it to as Per Photo

hope this helps if you get an error before you get this far I my self would reinstall the software and check the usb cable is plugged in well

David G1DCG