Greetings,

A new daily build of CHIRP is available. This includes changes made directly to the tree yesterday, and may include additional features, bug fixes, and/or bugs. If you are interested in trying it, grab it from the following location:

http://trac.chirp.danplanet.com/chirp_daily/daily-20150123

A list of the changes included in this build (since the last daily) follows:

Changes for Build #319 [K. Arvanitis kosta@alumni.uvic.ca] [FT-60] Adding Support for Settings to Yaesu FT-60 Added support for most of the basic (but not all) settings avail. on the FT-60. Note: some settings map to the memory bank and are therefore not included in this list. Note: the list of settings and categories was taken from the user manual for this radio. Tested against the specific revision model no. FT-60R. Feature #1759

[Jens Jensen af5mi@yahoo.com] [th9800] add tuning steps per channel #1353

[Jens Jensen af5mi@yahoo.com] [th9800] add tx inhibit feature per channel #2229

add tx inhibit feature by setting txfreq and offset to 0. Causes RX to be normal, but when duplex=off, no TX and ERROR displayed along with beep.

Note: Minor cosmetic side effect is that display indicates negative duplex offset, probably because 0 is always < rxfreq. This may be unavoidable unless we can find an actual channel flag which is designated for tx inhibit.

Also added channel field "reverse" to map.