[chirp_users] channel mode issues
i looked thru faqs and lists didnt find info. i have 2 Baofeng uv-82hp radios and they will not switch to channel mode. i hold down menu button and switch off/on power. powers up everytime in frequency mode. i uploaded info to radios using chirp and can download from radios.
On Sun, Jan 10, 2021 at 10:35 AM Tall Pine Construction tallpineomaha@gmail.com wrote:
i looked thru faqs and lists didnt find info. i have 2 Baofeng uv-82hp radios and they will not switch to channel mode. i hold down menu button and switch off/on power. powers up everytime in frequency mode. i uploaded info to radios using chirp and can download from radios.
This is most likely due to you performing a RESET on one or both of the radios. Performing a menu 40 (RESET) on a UV-82HP switches the radio to VFO mode and disables the "VFO/MR Switching" setting. Don't ever perform a RESET on a UV-82HP unless you have a computer running CHIRP and a working programming cable close by.
After download from the UV-82HP, CHIRP inherits this VFO/MR Setting as "disabled". Until you enable the setting in CHIRP, uploading the image into any UV-82HP radio will disable the setting preventing the radio from switching between VFO and MR modes.
Settings -> Advanced Settings -> VFO/MR Switching (BTech UV-82HP only). [X]
Jim KC9HI
Thank you so much, i was thinking i didnt finish something right. that was it. it works properly now. i just need to practice and learn more on these things. thanks again
------ Original Message ------ From: "Jim Unroe" rock.unroe@gmail.com To: "Discussion of CHIRP" chirp_users@intrepid.danplanet.com Sent: 1/10/2021 9:51:26 AM Subject: Re: [chirp_users] channel mode issues
On Sun, Jan 10, 2021 at 10:35 AM Tall Pine Construction tallpineomaha@gmail.com wrote:
i looked thru faqs and lists didnt find info. i have 2 Baofeng uv-82hp radios and they will not switch to channel mode. i hold down menu button and switch off/on power. powers up everytime in frequency mode. i uploaded info to radios using chirp and can download from radios.
This is most likely due to you performing a RESET on one or both of the radios. Performing a menu 40 (RESET) on a UV-82HP switches the radio to VFO mode and disables the "VFO/MR Switching" setting. Don't ever perform a RESET on a UV-82HP unless you have a computer running CHIRP and a working programming cable close by.
After download from the UV-82HP, CHIRP inherits this VFO/MR Setting as "disabled". Until you enable the setting in CHIRP, uploading the image into any UV-82HP radio will disable the setting preventing the radio from switching between VFO and MR modes.
Settings -> Advanced Settings -> VFO/MR Switching (BTech UV-82HP only). [X]
Jim KC9HI _______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to todd at tallpineomaha@gmail.com To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com
On Sun, Jan 10, 2021 at 1:15 PM Tall Pine Construction tallpineomaha@gmail.com wrote:
Thank you so much, i was thinking i didnt finish something right. that was it. it works properly now. i just need to practice and learn more on these things. thanks again
If you haven't already, visit the miklor.com website. Especially my detailed menu reference guides and the CHIRP section with guides and examples.
Jim KC9HI
participants (2)
-
Jim Unroe -
Tall Pine Construction