[chirp_users] Yaesu FT-7100
I hauled out my FT-7100 and thought I'd give CHIRP a try for programming it since it's no in the list of supported radios.
Everything went smoothly until I tried to connect to the radio. I'm using a Tripp-Lite USB to Serial adapter and my Win10 machine shows in on port 10.
When trying to upload a newly edited copy of an old .eep file, I eventually receive a message that says it can't connect to the radio.
Looking for troubleshooting ideas.
Dick W4RSS
MY advice? Fork out the dough and just use the ADMS software. It’s pricey, but it works. Flawlessly.
On Mar 29, 2020, at 1:10 PM, w4rss@radioclub.org wrote:
I hauled out my FT-7100 and thought I'd give CHIRP a try for programming it since it's no in the list of supported radios.
Everything went smoothly until I tried to connect to the radio. I'm using a Tripp-Lite USB to Serial adapter and my Win10 machine shows in on port 10.
When trying to upload a newly edited copy of an old .eep file, I eventually receive a message that says it can't connect to the radio.
Looking for troubleshooting ideas.
Dick W4RSS
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Mark at kb6kgx@mac.com To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com
Scroll to the bottom of the ports listing and use USB0. Worked for me with a similar issue.
On Sun, Mar 29, 2020, 16:11 w4rss@radioclub.org wrote:
I hauled out my FT-7100 and thought I'd give CHIRP a try for programming it since it's no in the list of supported radios.
Everything went smoothly until I tried to connect to the radio. I'm using a Tripp-Lite USB to Serial adapter and my Win10 machine shows in on port 10.
When trying to upload a newly edited copy of an old .eep file, I eventually receive a message that says it can't connect to the radio.
Looking for troubleshooting ideas.
Dick W4RSS
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Joel at jfleland@gmail.com To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com
I think you’re thinking of a different operating system than Windows 10 je is using.
Jardy Dawson WA7JRD
Message sent by....Oh, who the heck cares, anyway? Could be my shoelaces, as far as I care!
On Mar 29, 2020, at 14:28, Joel Leland jfleland@gmail.com wrote:
Scroll to the bottom of the ports listing and use USB0. Worked for me with a similar issue.
On Sun, Mar 29, 2020, 16:11 w4rss@radioclub.org wrote: I hauled out my FT-7100 and thought I'd give CHIRP a try for programming it since it's no in the list of supported radios.
Everything went smoothly until I tried to connect to the radio. I'm using a Tripp-Lite USB to Serial adapter and my Win10 machine shows in on port 10.
When trying to upload a newly edited copy of an old .eep file, I eventually receive a message that says it can't connect to the radio.
Looking for troubleshooting ideas.
Dick W4RSS
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Joel at jfleland@gmail.com To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Jardy at jardy72@yahoo.com To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com
I am using a UV-5RA and it has about a sec delay before I hear the other person talk is this normal or is there a setting someplace that I can change? A real pain as it cuts off the other persons one or 2 first words.
Thanks
On 3/29/2020 4:27 PM, Joel Leland wrote:
Scroll to the bottom of the ports listing and use USB0. Worked for me with a similar issue.
On Sun, Mar 29, 2020, 16:11 <w4rss@radioclub.org mailto:w4rss@radioclub.org> wrote:
I hauled out my FT-7100 and thought I'd give CHIRP a try for programming it since it's no in the list of supported radios. Everything went smoothly until I tried to connect to the radio. I'm using a Tripp-Lite USB to Serial adapter and my Win10 machine shows in on port 10. When trying to upload a newly edited copy of an old .eep file, I eventually receive a message that says it can't connect to the radio. Looking for troubleshooting ideas. Dick W4RSS _______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com <mailto:chirp_users@intrepid.danplanet.com> http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Joel at jfleland@gmail.com <mailto:jfleland@gmail.com> To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com <mailto:chirp_users-unsubscribe@intrepid.danplanet.com>
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Dave at weather@lightingunlimited.com To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com
On the baofeng 888 model and that happens when the "battery saver" option is enabled. See if your radio has that and if it is turned on.
Tony ________________________________ From: chirp_users-bounces@intrepid.danplanet.com chirp_users-bounces@intrepid.danplanet.com on behalf of David weather@lightingunlimited.com Sent: Sunday, March 29, 2020 5:25:00 PM To: chirp_users@intrepid.danplanet.com chirp_users@intrepid.danplanet.com Subject: Re: [chirp_users] Baofeng UV-5RA
I am using a UV-5RA and it has about a sec delay before I hear the other person talk is this normal or is there a setting someplace that I can change? A real pain as it cuts off the other persons one or 2 first words.
Thanks
On 3/29/2020 4:27 PM, Joel Leland wrote: Scroll to the bottom of the ports listing and use USB0. Worked for me with a similar issue.
On Sun, Mar 29, 2020, 16:11 <w4rss@radioclub.orgmailto:w4rss@radioclub.org> wrote: I hauled out my FT-7100 and thought I'd give CHIRP a try for programming it since it's no in the list of supported radios.
Everything went smoothly until I tried to connect to the radio. I'm using a Tripp-Lite USB to Serial adapter and my Win10 machine shows in on port 10.
When trying to upload a newly edited copy of an old .eep file, I eventually receive a message that says it can't connect to the radio.
Looking for troubleshooting ideas.
Dick W4RSS
_______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.commailto:chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Joel at jfleland@gmail.commailto:jfleland@gmail.com To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.commailto:chirp_users-unsubscribe@intrepid.danplanet.com
_______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.commailto:chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Dave at weather@lightingunlimited.commailto:weather@lightingunlimited.com To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.commailto:chirp_users-unsubscribe@intrepid.danplanet.com
Is it on a repeater? Since a lot of repeaters are using a digital tie-in, they are often delayed when it is actively linked. Glenn ----- Original Message ----- From: David To: chirp_users@intrepid.danplanet.com Sent: Sunday, March 29, 2020 5:25 PM Subject: Re: [chirp_users] Baofeng UV-5RA
I am using a UV-5RA and it has about a sec delay before I hear the other person talk is this normal or is there a setting someplace that I can change? A real pain as it cuts off the other persons one or 2 first words.
Thanks
On 3/29/2020 4:27 PM, Joel Leland wrote:
Scroll to the bottom of the ports listing and use USB0. Worked for me with a similar issue.
On Sun, Mar 29, 2020, 16:11 w4rss@radioclub.org wrote:
I hauled out my FT-7100 and thought I'd give CHIRP a try for programming it since it's no in the list of supported radios.
Everything went smoothly until I tried to connect to the radio. I'm using a Tripp-Lite USB to Serial adapter and my Win10 machine shows in on port 10.
When trying to upload a newly edited copy of an old .eep file, I eventually receive a message that says it can't connect to the radio.
Looking for troubleshooting ideas.
Dick W4RSS
_______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Joel at jfleland@gmail.com To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com
_______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Dave at weather@lightingunlimited.com To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com
------------------------------------------------------------------------------
_______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Glenn at glennervin@cableone.net To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com
Nope no repeater.
David
On 3/29/2020 5:39 PM, Glenn K0LNY wrote:
Is it on a repeater? Since a lot of repeaters are using a digital tie-in, they are often delayed when it is actively linked. Glenn
----- Original Message ----- *From:* David <mailto:weather@lightingunlimited.com> *To:* chirp_users@intrepid.danplanet.com <mailto:chirp_users@intrepid.danplanet.com> *Sent:* Sunday, March 29, 2020 5:25 PM *Subject:* Re: [chirp_users] Baofeng UV-5RA I am using a UV-5RA and it has about a sec delay before I hear the other person talk is this normal or is there a setting someplace that I can change? A real pain as it cuts off the other persons one or 2 first words. Thanks On 3/29/2020 4:27 PM, Joel Leland wrote:Scroll to the bottom of the ports listing and use USB0. Worked for me with a similar issue. On Sun, Mar 29, 2020, 16:11 <w4rss@radioclub.org <mailto:w4rss@radioclub.org>> wrote: I hauled out my FT-7100 and thought I'd give CHIRP a try for programming it since it's no in the list of supported radios. Everything went smoothly until I tried to connect to the radio. I'm using a Tripp-Lite USB to Serial adapter and my Win10 machine shows in on port 10. When trying to upload a newly edited copy of an old .eep file, I eventually receive a message that says it can't connect to the radio. Looking for troubleshooting ideas. Dick W4RSS _______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com <mailto:chirp_users@intrepid.danplanet.com> http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Joel at jfleland@gmail.com <mailto:jfleland@gmail.com> To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com <mailto:chirp_users-unsubscribe@intrepid.danplanet.com> _______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Dave atweather@lightingunlimited.com To unsubscribe, send an email tochirp_users-unsubscribe@intrepid.danplanet.com------------------------------------------------------------------------ _______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Glenn at glennervin@cableone.net To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Dave at weather@lightingunlimited.com To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com
In the future when you want to address the group with a question, please start your own post and don't hijack someone else's' Thank you.
On Sun, Mar 29, 2020 at 6:25 PM David weather@lightingunlimited.com wrote:
I am using a UV-5RA and it has about a sec delay before I hear the other person talk is this normal or is there a setting someplace that I can change? A real pain as it cuts off the other persons one or 2 first words.
Thanks On 3/29/2020 4:27 PM, Joel Leland wrote:
Scroll to the bottom of the ports listing and use USB0. Worked for me with a similar issue.
On Sun, Mar 29, 2020, 16:11 w4rss@radioclub.org wrote:
I hauled out my FT-7100 and thought I'd give CHIRP a try for programming it since it's no in the list of supported radios.
Everything went smoothly until I tried to connect to the radio. I'm using a Tripp-Lite USB to Serial adapter and my Win10 machine shows in on port 10.
When trying to upload a newly edited copy of an old .eep file, I eventually receive a message that says it can't connect to the radio.
Looking for troubleshooting ideas.
Dick W4RSS
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Joel at jfleland@gmail.com To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com
chirp_users mailing listchirp_users@intrepid.danplanet.comhttp://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Dave at weather@lightingunlimited.com To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to John Wuest at jhwuest@gmail.com To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com
I am using a UV-5RA and it has about a sec delay before I hear the other person talk is this normal or is there a setting someplace that I can change? A real pain as it cuts off the other persons one or 2 first words.
Thanks
Set menu 35 (STE), menu 36 (RP-STE) and menu 37 (RPT-RL) to OFF
http://www.miklor.com/COM/UV_MenuDef.php
You can do this within CHIRP as well...
Settings -> Advanced Settings -> Squelch Tail Eliminate (HT to HT): [ ] Settings -> Advanced Settings -> Squelch Tail Eliminate (repeater): OFF Settings -> Advanced Settings -> STE Repeater Delay: OFF
Jim KC9HI
Not sure how to do that?
David
On 3/30/2020 5:47 PM, John Wuest wrote:
In the future when you want to address the group with a question, please start your own post and don't hijack someone else's' Thank you.
On Sun, Mar 29, 2020 at 6:25 PM David <weather@lightingunlimited.com mailto:weather@lightingunlimited.com> wrote:
I am using a UV-5RA and it has about a sec delay before I hear the other person talk is this normal or is there a setting someplace that I can change? A real pain as it cuts off the other persons one or 2 first words. Thanks On 3/29/2020 4:27 PM, Joel Leland wrote:Scroll to the bottom of the ports listing and use USB0. Worked for me with a similar issue. On Sun, Mar 29, 2020, 16:11 <w4rss@radioclub.org <mailto:w4rss@radioclub.org>> wrote: I hauled out my FT-7100 and thought I'd give CHIRP a try for programming it since it's no in the list of supported radios. Everything went smoothly until I tried to connect to the radio. I'm using a Tripp-Lite USB to Serial adapter and my Win10 machine shows in on port 10. When trying to upload a newly edited copy of an old .eep file, I eventually receive a message that says it can't connect to the radio. Looking for troubleshooting ideas. Dick W4RSS _______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com <mailto:chirp_users@intrepid.danplanet.com> http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Joel at jfleland@gmail.com <mailto:jfleland@gmail.com> To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com <mailto:chirp_users-unsubscribe@intrepid.danplanet.com> _______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com <mailto:chirp_users@intrepid.danplanet.com> http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Dave atweather@lightingunlimited.com <mailto:weather@lightingunlimited.com> To unsubscribe, send an email tochirp_users-unsubscribe@intrepid.danplanet.com <mailto:chirp_users-unsubscribe@intrepid.danplanet.com>_______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com <mailto:chirp_users@intrepid.danplanet.com> http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to John Wuest at jhwuest@gmail.com <mailto:jhwuest@gmail.com> To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com <mailto:chirp_users-unsubscribe@intrepid.danplanet.com>
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Dave at weather@lightingunlimited.com To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com
On Mon, Mar 30, 2020, 19:29 David weather@lightingunlimited.com wrote:
Not sure how to do that?
David
Info is at the bottom of every email but the answer is send your question to chirp_users@intrepid.danplanet.com
Dave W2IJL
(1) The first thing you must do with CHIRP is download from the radio to create an image (.img file) for CHIRP to use for your radio. Save-As that file in a safe place to have it available to restore the radio later if needed. Name it something like "FT-7100 Initial Download Image 03-20-2020" (2) Make the changes you want using the CHIRP editor, and then save that file with something like "FT-7100 Changes 03-30-2010" (3) Upload your newly modified image file to the radio.
On Sun, Mar 29, 2020 at 4:10 PM w4rss@radioclub.org wrote:
I hauled out my FT-7100 and thought I'd give CHIRP a try for programming it since it's no in the list of supported radios.
Everything went smoothly until I tried to connect to the radio. I'm using a Tripp-Lite USB to Serial adapter and my Win10 machine shows in on port 10.
When trying to upload a newly edited copy of an old .eep file, I eventually receive a message that says it can't connect to the radio.
Looking for troubleshooting ideas.
Dick W4RSS
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to John Wuest at jhwuest@gmail.com To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com
participants (10)
-
Dave Matthews -
David -
Glenn K0LNY -
Jardy -
Jim Unroe -
Joel Leland -
John Wuest -
Mark Lassman -
Tony Fuller -
w4rss＠radioclub.org